Intel SC5650-DP, Service Manual

Page: 55 / 174

Hardware Installations and Upgrades
Intel
®
Chassis SC5650-DP/WS/BRP/UP Service Guide 37
3. Remove the left side cover. For instructions, see “Removing the Left Side Cover” .
4. Open the back panel PCI Add-in Card Retention Device by pressing open from the
inside of the chassis.
Figure 40. Opening PCI Add-in Card Retention Device (DP/WS/BRP configuration
shown)
5. If it is already not removed, remove the PCI slot shield by pushing the shield out from
the inside of the chassis.
Figure 41. Removing PCI Slot Shield
6. Remove a PCI add-in board from its protective wrapper. Be careful not to touch the
components or gold-edge connectors. Place the board on an anti-static surface. Record
the type and serial number of the add-in board in your equipment log. Set jumpers or
switches on the board according to the manufacturer’s instructions.
TP02049
TP01744