Local Control Panel Kit Installation Instructions
14
Local Control Panel Kit Install Guide
Install EMI Shield onto LCP Carrier
Your backplane board shipped with an EMI shield that has to be installed. Install the EMI
shield by aligning the middle tooth (see letter “A” in the following figure) with the
indentation in the side of the LCP carrier.
Figure 18. Installing EMI Shield on LCP Carrier
Inserting LCP Carrier into Drive Bay of Server Chassis
1. Install the drive rails by attaching each rail with two screws to the two lower holes on
each side of the LCP carrier. Use the F holes on the drive rails.
Figure 19. Installing Drive Rails to LCP Carrier
TP00635
A
TP00644
A