manualshive.com logo in svg

Intel S975XBX2 - Workstation Board Motherboard, Specification, Page: 80 / 102

Share
Download
Intel S975XBX2 - Workstation Board Motherboard Specification Download Page 80

Intel Workstation Board S975XBX2 Technical Product Specification 

80 

 

3.5

 

Legacy USB Support 

Legacy USB support enables USB devices to be used even when the operating 
system’s USB drivers are not yet available.  Legacy USB support is used to access the 
BIOS Setup program, and to install an operating system that supports USB. 

Legacy USB support operates as follows: 
1.

 

When you apply power to the computer, legacy support is disabled. 

2.

 

POST begins. 

3.

 

Legacy USB support is enabled by the BIOS allowing you to use a USB keyboard to 
enter and configure the BIOS Setup program and the maintenance menu. 

4.

 

POST completes. 

5.

 

The operating system loads.  While the operating system is loading, USB 
keyboards and mice are recognized and may be used to configure the operating 
system. 

6.

 

After the operating system loads the USB drivers, all legacy and non-legacy USB 
devices are recognized by the operating system, and Legacy USB support from the 
BIOS is no longer used. 

To install an operating system that supports USB, follow the operating system’s 
installation instructions.   

3.6

 

BIOS Updates 

The BIOS can be updated using either of the following utilities, which are available on 
the Intel World Wide Web site: 

•

 

Intel

®

 Express BIOS Update utility, which enables automated updating while in the 

Microsoft Windows environment.  Using this utility, the BIOS can be updated from 
a file on a hard disk, a 1.44 MB diskette, or a CD-ROM, or from the file location on 
the Web. 

•

 

Intel

®

 Flash Memory Update Utility, which requires creation of a boot diskette and 

manual rebooting of the system.  Using this utility, the BIOS can be updated from 
a file on a 1.44 MB diskette or a CD-ROM. 

Both utilities verify that the updated BIOS matches the target system to prevent 
accidentally installing an incompatible BIOS. 

 

NOTE 

Review the instructions distributed with the upgrade utility before attempting a BIOS 
update. 

 

For information about  

Refer to 

The Intel World Wide Web site 

Section 1.2, page 17 

Summary of Contents for S975XBX2 - Workstation Board Motherboard







































































































Reviews:

No comments