Intel S975XBX2 - Workstation Board Motherboard, Specification, Page: 30 / 102

Intel Workstation Board S975XBX2 Technical Product Specification
30
For information about Refer to
The location of the serial port A connector Figure 15, page 55
1.9.2 Parallel Port
The 25-pin D-Sub parallel port connector is located on the back panel. Use the BIOS
Setup program to set the parallel port mode.
For information about Refer to
The location of the parallel port connector Figure 15, page 55
1.9.3 Diskette Drive Controller
The legacy I/O controller supports one diskette drive. Use the BIOS Setup program to
configure the diskette drive interface.
For information about Refer to
The location of the diskette drive connector on the S975XBX2 board Figure 16, page 56
1.9.4 Keyboard and Mouse Interface
PS/2 keyboard and mouse connectors are located on the back panel.
NOTE
The keyboard is supported in the bottom PS/2 connector and the mouse is supported
in the top PS/2 connector. Power to the computer should be turned off before a
keyboard or mouse is connected or disconnected.
For information about Refer to
The location of the keyboard and mouse connectors Figure 15, page 55