manualshive.com logo in svg

Intel S975XBX2 - Workstation Board Motherboard, Specification, Page: 32 / 102

Share
Download
Intel S975XBX2 - Workstation Board Motherboard Specification Download Page 32

Intel Workstation Board S975XBX2 Technical Product Specification 

32 

 

1.10.3

 

6-Channel (5.1) Audio Subsystem 

The 6-channel (5.1) audio subsystem includes the following: 

•

 

Intel 82801G I/O Controller Hub (ICH7-R) 

•

 

SigmaTel 9227 audio codec 

•

 

Microphone input that supports a single dynamic, condenser, or electret 
microphone 

The back panel audio connectors are configurable through the audio device drivers.  
The available configurable audio ports are shown in Figure 10. 

OM18469

Line In/Retasking Jack

[Blue]

Mic In/Retasking Jack

[Pink]

Line Out/Retasking Jack

[Green]

Mic In/

Retasking Jack

[Pink]

        Line Out/

Retasking Jack

          [Green]

       Front Panel Audio Connectors

[Routed from Front Panel Audio Header]

Back Panel Audio Connectors

 

Figure 10.  Front/Back Panel Audio Connector Options for 6-Channel (5.1) 

Audio Subsystem 

 

For information about  

Refer to 

The back panel audio connectors 

Section 2.7.1, page 54 

Summary of Contents for S975XBX2 - Workstation Board Motherboard







































































































Reviews:

No comments