Intel® Storage Expander RES3TV360 Hardware User’s Guide
10
5.
Using a Philips head screwdriver, secure the card to the standoffs on the chassis with the three screws
provided in the kit.
6.
Connect serial cables between the expander card and internal drives, as required. Connect serial cables
between the expander card and the host SAS or RAID controller.
Caution:
Follow the instructions carefully when connecting the connectors from the SAS expander to the connectors on the
midplane. Each connector is pre-programmed at the factory to provide specific drive identification mapping. Improper
connections may provide undesirable drive mapping.
Figure 4. Cable Connection of Expander Card with Internal Ports
7.
Close your computer cabinet, reconnect the power cord(s) and network cables, then power up the system.
