Intel R2000LH2, Quick Installation User'S Manual

Page: 13 / 20

9
General Installation Process
Optical
Device
Assembly
C
A
A
B
Install Air Duct
NOTE : Take care to avoid pinching system cables.
Bend and slide in the air duct.
A
Install the air duct into the chassis.
B
Flip-down the tilt bay.
C
14
Riser Connector
REMOVE Filler Panel
A
A
B
C
Add-in Card
B
Add-in Card
C
Use provided
small bracket
for low profile
half-length PCI
add-in card.
Riser Connector
REMOVE Filler Panel
C
D
Add-in Card
E
B
A
15
Install Add-in Card(s)
A
B
C
CAUTION:
Observe normal ESD precautions
when installing add-in cards.
Remove the filler panel from the add-in card slot and
install the provided proper bracket as shown.
Insert add-in card until it sits in the riser connector.
Secure add-in card with screw provided with bracket
as shown.
NOTE : Make sure that all empty add-in card slots have
filler panels installed.
For Half-length PCI Add-in Card(s)
For Full-length PCI Add-in Card(s)
A
Remove the screw as shown.
Install the provided proper
bracket as shown.
B
Remove the filler panel from
the add-in card slot and
remove the screw as shown.
C
Install add-in card until it
sits in the riser connector.
D
Secure add-in card with screw
provided with bracket as
shown.
E