7
General Installation Process
Internal Fixed 2.5" SSD Drive Carrier
A. Remove the Rack Handles
C. Install Internal SSD(s)
D. Install the Front End Module
E. Install the Rack Handles
B. Slide the Front End Module
Remove the two
screws to release
the Solid State
Drive carrier.
A
Remove the two screws securing
the rack handle from the chassis
and then remove the rack handle.
A
Place the Solid State Drive in
the carrier.
B
Secure the Solid State Drive
with the four screws.
C
Slide the Solid
State Drive carrier
into the chassis.
D
Secure the Solid
State Drive carrier
with the two screws.
E
Connect the cables.
F
Remove the six screws
securing the front end
module from the chassis.
A
Slide the front end of
the module forward a
little.
B
Push the front end module into place.
A
Align the rack handle with the two holes on the side of the
server system and secure the rack handle to the server system
with two screws.
A
Secure the front end module with six screws.
B
A
Optical
Devic
e
Assembly
A
B
A
Optical
Devic
e
Assembly
B
B
A
A
D
Power
Data
F
E
C
B
A
Summary of Contents for R2000LH2
Page 2: ... This page is intentionally left blank ...
Page 20: ...G54804 003 ...
