manualshive.com logo in svg

Intel PXA27x Series, User Manual, Page: 7 / 88

Share
Download
Intel PXA27x Series User Manual Download Page 7

Intel

®

 PXA27x Processor Developer’s Kit - User’s Guide

  

7

 

Introduction and Startup

1

The Intel

®

 PXA27x Processor Developer’s Kit (kit), constitutes a software-development kit based 

on Intel

®

 PXA270 Processor. This kit provides all of the system components necessary for 

Microsoft Windows* CE, Symbian*, Palm*, Linux, and other full-featured, handheld operating 
system.

Note:

The kit comes with a factory installed the Intel

®

 PXA270 Processor.

The Intel

®

 PXA270 Processor is the third implementation of the Intel XScale

®

 microarchitecture 

family, featuring an improved LCD controller, expanded card interface, and more conservative 
power management features. It is also the first processor in the family to include a baseband 
interface, integrated SRAM, a camera capture interface, scalable core frequencies, USB On-the-Go 
(OTG), full SDIO support, and an Intel coprocessor. The coprocessor extends the Intel XScale

®

 

microarchitecture capabilities by adding MMX and SSE functionality and additional audio and 
video processing operations. 

1.1

System Overview

The kit provides access to most of the Intel

®

 PXA270 Processor native input/output (I/O) 

functions. The kit kit consists of:

•

Intel

®

 PXA27x Processor Developer’s Kit Main Board (main board), which contains 

peripheral and expansion capability to aid in application software development

•

Intel

®

 PXA27x Processor Developer’s Kit Daughter Card (daughter card), which can either 

dock with the main board or operate independently

•

Intel

®

 PXA27x Processor Card (processor card), which is a board to allow for field upgrades 

to the kit system as new steppings of silicon arrive.

•

Intel

®

 PXA27x Processor Developer’s Kit Power Manager Integrated Circuit (Low DropOut) 

Card (PMIC card) card, which supplies all the various power domains for the system

•

Intel

®

 PXA27x Processor Developer’s Kit UCB1400 Audio Module (audio module), which 

allows for the changing of audio CODECs depending on system usage.

•

AC-to-DC power supply

•

Hinged, fold-out user-interface panel containing the following:

— LCD panel

— touch screen

— matrix keypad and scroll wheel

— microphone and speaker

— video camera

•

Mounting chassis that integrates all kit components into a compact, accessible package

Summary of Contents for PXA27x Series

























































































Reviews:

No comments