manualshive.com logo in svg

Intel Omni-Path Director Class Switch Series, Installation Manual

Share
Download
Intel Omni-Path Director Class Switch Series Installation Manual Download Page 84

Fans and Power Supplies LEDs

Fan LEDs

Figure 69.

Director Class Fan LEDs

Fan LEDs indicate the following status(es):
•

Green

 indicates that the fan is functioning properly.

•

Amber

 indicates that the following warning condition exists:

— A single fan failure when the rotation speed is less than 4000 RPM or greater

than 10,950 RPM.

•

Green

 and 

Amber

 on indicates a possible problem, including:

— The fan tray is not responding to commands for configuration and

temperature-related operations.

— A fan is not responding to commands for temperature and speed related

operations.

— The fan speed has fallen below the minimum allowed RPM for a fan.

2.8.2.5  

Intel

®

 Omni-Path Fabric—Installation

Intel

®

 Omni-Path Fabric Switches Hardware

Installation Guide

June 2019

84

Doc. No.: H76456, Rev.: 10.0

Summary of Contents for Omni-Path Director Class Switch Series




























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands