manualshive.com logo in svg

Intel Omni-Path Director Class Switch Series, Installation Manual

Share
Download
Intel Omni-Path Director Class Switch Series Installation Manual Download Page 45

Figure 25.

Q7 Module Mounting Screw

4. Reattach the switch cover.

NOTE

For information on upgrading Q7 board controller firmware (BCFW) and BIOS, refer to 

Q7 BIOS Update

 on page 86.

Intel

®

 Omni-Path Director Class Switch 100 Series

Installation

Mounting Hardware Kit Contents

The Mounting Kit contains:
•

Support Shelf (1)

•

Baffles (2)

•

#10 Mounting screws

•

#10 Mounting nuts

•

M6 Mounting Screws

Unpacking the Switch

NOTE

Set aside packaging materials in the event that the switch requires return shipment.

The following images and descriptions give a high-level overview for unpacking a

Director Switch (24-slot model in this example).

2.4  

2.4.1  

2.4.2  

Installation—Intel

®

 Omni-Path Fabric

Intel

®

 Omni-Path Fabric Switches Hardware

June 2019

Installation Guide

Doc. No.: H76456, Rev.: 10.0

45

Summary of Contents for Omni-Path Director Class Switch Series




























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands