Intel NUC Kit NUC5PGYH Technical Product Specification Download Page 51

Page: 51 / 79

Technical Reference

Table 20 lists the settings for the jumper.

Table 20. BIOS Security Jumper Settings

Function/Mode

Jumper Setting

Configuration

Normal

1-2

The BIOS uses current configuration information and passwords for
booting.

Lockdown

2-3

The BIOS uses current configuration information and passwords for
booting, except:

• All POST Hotkeys are suppressed (prompts are not displayed and keys

are not accepted. For example, F2 for Setup, F10 for the Boot Menu).

• Power Button Menu is not available (see Section 3.7.4 Power Button

Menu).

BIOS updates are not available except for automatic Recovery due to flash
corruption.

Configuration

None

BIOS Recovery Update process if a matching *.bio file is found. Recovery
Update can be cancelled by pressing the Esc key.

If the Recovery Update was cancelled or a matching *.bio file was not
found, a Config Menu will be displayed. The Config Menu consists of the
following (followed by the Power Button Menu selections):

[1] Suppress this menu until the BIOS Security Jumper is replaced.

[2] Clear BIOS User and Supervisor Passwords.

See Section 3.7.4 Power Button Menu.

Summary of Contents for NUC Kit NUC5PGYH
















































































Search results

Summary of Contents for NUC Kit NUC5PGYH

Reviews:

Related manuals for NUC Kit NUC5PGYH

Brands by name

Popular brands

Intel NUC Kit NUC5PGYH, Technical Product Specification

Search results

Summary of Contents for NUC Kit NUC5PGYH

Reviews:

Related manuals for NUC Kit NUC5PGYH

Brands by name

Popular brands