Intel NUC Kit NUC5PGYH Technical Product Specification Download Page 56 | Manualshive

Page: 56 / 79

background image

Intel NUC Board NUC5PGYH Technical Product Specification

56

2.7

Reliability

The Mean Time Between Failures (MTBF) prediction is calculated using component and
subassembly random failure rates. The calculation is based on the Telcordia SR-332-2 Issue 2,
Method I, Case 3, 55 ºC ambient. The MTBF prediction is used to estimate repair rates and spare
parts requirements. The MTBF for the board is 64,688 hours.

2.8

Environmental

Table 24 lists the environmental specifications for the board.

Table 24. Environmental Specifications

Parameter

Specification

Temperature

Non-Operating

-40

°

C to +60

°

C

Operating

0

°

C to +40

°

C

The operating temperature of the board may be determined by measuring the air
temperature from the junction of the heatsink fins and fan, next to the attachment screw,
in a closed chassis, while the system is in operation.

Shock

Unpackaged

50 g trapezoidal waveform

Velocity change of 170 inches/s²

Packaged

Half sine 2 millisecond

Product Weight (pounds)

Free Fall (inches)

Velocity Change (inches/s²)

<20

36

167

21-40

30

152

41-80

24

136

81-100

18

118

Vibration

Unpackaged

5 Hz to 20 Hz: 0.01 g² Hz sloping up to 0.02 g² Hz

20 Hz to 500 Hz: 0.02 g² Hz (flat)

Packaged

5 Hz to 40 Hz: 0.015 g² Hz (flat)

40 Hz to 500 Hz: 0.015 g² Hz sloping down to 0.00015 g² Hz

Note: Before attempting to operate this board, the overall temperature of the board must be above the minimum

operating temperature specified. It is recommended that the board temperature be at least room temperature
before attempting to power on the board. The operating and non-operating environment must avoid condensing
humidity.

«
...
54
55
56
57
58
...
»

Summary of Contents for NUC Kit NUC5PGYH
















































































Reviews:

No comments

Related manuals for NUC Kit NUC5PGYH

Brand: National Instruments Pages: 93

Brand: Barco Pages: 202

Decision Mate V

Brand: NCR Pages: 426

Brand: ESI Pages: 8

Brand: IBM Pages: 165

Brand: Radio Shack Pages: 40

DECstaion 5000 240

Brand: Digital Equipment Pages: 62

Brand: NUANCE Pages: 2

Brand: Lobo Drives Pages: 40

Brand: MSI Pages: 1

Brand: MSI Pages: 41

Brand: Alienware Pages: 55

Brand: Korg Pages: 233

ESPRIMO Q5 Series

Brand: Fujitsu Pages: 61

Brand: Kennmex Pages: 40

Brand: Böning Pages: 42

NMS CLIENT 3-T-II

Brand: Novus Pages: 60

Brand: Silicon Graphics Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands