C H A P T E R 5 Intel
®
Express 530T Switch Users Guide
82
Configure VLAN Operation Mode
Description
This screen allows you to activate or change the type of VLAN operating
on the switch. If there are no VLANs active on the switch, this is the first
screen displayed when you select Configure VLAN from the Main
Menu. By default, VLANs are not active on the Express 530T switch so
they must be turned on before you can start configuring them.
The Express 530T supports only a single type of VLAN operating at a
time. However, you can have multiple VLANs of the same type.
Select the type of VLAN: Press
z
to change the type of VLAN
on the switch. The 530T switch supports two types of VLANs: port-
based and IEEE 802.1Q (tag-based) VLANs.
APPLY: Makes the changes to the VLAN active and reboots the switch.
Note: To change between VLAN types the switch must be rebooted.
1
Select Configure VLAN from the Main Menu.
2
From the Configure VLAN menu, select VLAN Operation Mode.
3
Press
z
to change the type of VLAN on the switch. Press
e
.
4
Select the APPLY button and press
e
. This reboots the switch
and changes the VLAN mode.
LOCATION
Main Menu
Configure VLAN
(if switch is in Default Mode)
530-Chapter5-part1.fm Page 82 Monday, September 11, 2000 4:16 PM
