C H A P T E R 4 Intel
®
Express 530T Switch Users Guide
34
Configuring a Port
You can use the Web Device Manager to enable or disable a port, and to
change its speed, duplex, flow control, and priority settings.
To change port settings
1
Click the Configure Stack menu and then click Port Settings. To
access the Port Settings screen for each port, click the port you want
to configure on the faceplate graphic.
2
Click the options you want to change.
•
Port State: Enable or disable the port.
•
Speed/Duplex: Set port speed to Auto-Negotiate, 10Mbps,or
100Mbps.
•
Flow Control: Enable or disable flow control.
•
Priority Queue: Set the priority queue for packets sent or
received on this port.
3
Click Submit.
NOTE
If you change the flow control
or IP settings, you must reboot
the switch before the new
settings can take effect.
530-Chapter4.fm Page 34 Monday, September 11, 2000 4:13 PM
