Intel EtherExpress PRO 10+ ISA, Installation Manual

Page: 31 / 35

12 Installing the Intel EtherExpress PRO 10+ ISA Ethernet Adapter
Connecting to a Microsoft Windows NT4.0 Server
10 Click on the “Install Microsoft Windows Network:” option, and click “OK”.
11 Click on the “Drivers” button from the “Network Setup” dialog box, and
click on “Add Adapter”.
12 Click “OK” to accept the default choice of “Unlisted or Updated Network
Adapter”.
13 Type the path “A:\WFW” in the “Install Driver” dialog box, and then insert
the Intel driver disk into the floppy drive, and click “OK”.
14 Select “Intel EtherExpress[TM] PRO/10 LAN Adapter” in the “Unlisted or
Updated Network Adapter” dialog box, and click “OK”.
15 Confirm the Interrupt Settings and click “OK”.
16 Confirm the Base I/O Port Settings and click “OK”.
17 Confirm the Transceiver Type settings and click “OK”.
18 Confirm the Link Speed settings and click “OK”.
19 Confirm the Power Management settings and click “OK”.
20 Confirm the AllFramesCRT settings and click “OK”.
21 Confirm the DynamicCRTMax settings and click “OK”.
22 Confirm the DynamicCRTIncrement settings and click “OK”.
23 Confirm the DynamicCRTInterval settings and click “OK”.
24 Make sure that the “Intel EtherExpress[TM] PRO/10 LAN Adapter
[NDIS2/NDIS3]” is selected in “Network Drivers”.
25 Accept the applicable network protocols, and then click on “CLOSE”.
26 At the “Network Setup” dialog box, click on “OK”.
27 Specify your User Name, Workgroup, and Computer Name in “Microsoft
Windows Network Names” dialog box, and click on “OK”. (The Drivers
will now start to copy).
28 To complete the installation, remove the Intel diskette from the floppy
drive and click on “Restart Computer” button in the “Windows Setup”
dialog box.