Intel BX80571E5300 - Pentium 2.6 GHz Processor Datasheet Download Page 92

Page: 92 / 100

Boxed Processor Specifications

Datasheet

7.2

Mechanical Specifications

7.2.1

Boxed Processor Cooling Solution Dimensions

This section documents the mechanical specifications of the boxed processor. The

boxed processor will be shipped with an unattached fan heatsink.

Figure 18

shows a

mechanical representation of the boxed processor.

Clearance is required around the fan heatsink to ensure unimpeded airflow for proper

cooling. The physical space requirements and dimensions for the boxed processor with

assembled fan heatsink are shown in

Figure 19

(Side View), and

Figure 20

(Top View).

The airspace requirements for the boxed processor fan heatsink must also be

incorporated into new baseboard and system designs. Airspace requirements are

shown in

Figure 24

and

Figure 25

. Note that some figures have centerlines shown

(marked with alphabetic designations) to clarify relative dimensioning.

NOTES:
1.

Diagram does not show the attached hardware for the clip design and is provided only as a
mechanical representation.

Figure 19.

Space Requirements for the Boxed Processor (Side View)

Figure 20.

Space Requirements for the Boxed Processor (Top View)

d P

Sid Vi

95.0

[3.74]

10.0

[0.39]

25.0

[0.98]

81.3
[3.2]

95.0

[3.74]

95.0

[3.74]

Summary of Contents for BX80571E5300 - Pentium 2.6 GHz Processor





































































































Search results

Summary of Contents for BX80571E5300 - Pentium 2.6 GHz Processor

Reviews:

Related manuals for BX80571E5300 - Pentium 2.6 GHz Processor

Brands by name

Popular brands

Intel BX80571E5300 - Pentium 2.6 GHz Processor, Datasheet

Search results

Summary of Contents for BX80571E5300 - Pentium 2.6 GHz Processor

Reviews:

Related manuals for BX80571E5300 - Pentium 2.6 GHz Processor

Brands by name

Popular brands