manualshive.com logo in svg

Intel BLKD945GPMLKR, Technical Product Specification, Page: 15 / 94

Share
Download
Intel BLKD945GPMLKR Technical Product Specification Download Page 15

Product Description 

 15 

1.2 Online Support 

To find information about…  

Visit this World Wide Web site: 

Intel Desktop Board D945GPM under 
“Desktop Board Products” or “Desktop 
Board Support” 

http://www.intel.com/design/motherbd

 

 

http://support.intel.com/support/motherboards/desktop

 

Available configurations for the Desktop 
Board D945GPM 

http://developer.intel.com/design/motherbd/pm/pm_available.htm

 

Processor data sheets  

http://www.intel.com/design/litcentr 

ICH7DH addressing 

http://developer.intel.com/products/chipsets 

Custom splash screens 

http://intel.com/design/motherbd/gen_indx.htm 

Audio software and utilities 

http://www.intel.com/design/motherbd 

LAN software and drivers 

http://www.intel.com/design/motherbd 

Supported video modes 

http://www.intel.com/design/motherbd/pm/pm_documentation.htm 

1.3 Processor 

The board is designed to support an Intel Pentium D processor in an LGA775 processor socket with 
a 1066 or 800 MHz system bus.  See the Intel web site listed below for the most up-to-date list of 
supported processors. 

 

For information about…  

Refer to: 

Supported processors 

http://www.intel.com/design/motherbd/pm/pm_proc.htm 

 CAUTION 

Use only the processors listed on web site above.  Use of unsupported processors can damage the 
board, the processor, and the power supply.   

 

#

 

INTEGRATOR’S NOTE 

Use only ATX12V-compliant power supplies.  

 

For information about  

Refer to 

Power supply connectors 

Section 2.7.2.1, page 59 

Summary of Contents for BLKD945GPMLKR































































































Reviews:

No comments