Intel BLKD945GPMLKR Technical Product Specification Download Page 10

Page: 10 / 94

Intel Desktop Board D945GPM Technical Product Specification

1.1 Overview

1.1.1 Feature

Summary

Table 1 summarizes the major features of the board.

Table 1.

Feature Summary

Form Factor

microATX (9.60 inches by 9.60 inches [243.84 millimeters by 243.84 millimeters])

Processor

Support for an Intel

Pentium

D processor in an LGA775 socket with a 1066 or

800 MHz system bus

Memory

•

Four 240-pin DDR2 SDRAM Dual Inline Memory Module (DIMM) sockets

•

Support for DDR2 667 or DDR2 533 MHz DIMMs

•

Support for up to 4 GB of system memory

Chipset

Intel

945G Chipset, consisting of:

•

Intel

82945G Graphics Memory Controller Hub (GMCH)

•

Intel

82801GH I/O Controller Hub (ICH7DH)

Video

Intel

GMA950 onboard graphics subsystem

Audio

8-channel (7.1) audio subsystem with five analog audio outputs and one S/PDIF
digital audio output (optical) using the Sigmatel* 9220/9223 audio codec

Legacy I/O Control

Legacy I/O controller for diskette drive, serial, parallel, and PS/2* ports

USB

Support for USB 2.0 devices

Peripheral
Interfaces

•

Eight USB ports

•

One serial port

•

Four Serial ATA interfaces

•

One Parallel ATA IDE interface with UDMA 33, ATA-66/100 support

•

One diskette drive interface

•

PS/2 keyboard and mouse ports

SATA RAID

RAID support (levels 0,1, 0+1, and 5) on the SATA interface

IEEE-1394a
Interface

IEEE-1394a controller and three IEEE-1394a connectors (one back panel
connector, two front-panel connectors)

LAN Support

Refer to Table 2 on page 11 for a description of LAN subsystem options.

BIOS

•

Intel

BIOS (resident in the SPI Flash device)

•

Support for Advanced Configuration and Power Interface (ACPI), Plug and Play,

and SMBIOS

Expansion
Capabilities

•

Two PCI Conventional* bus connectors

•

One PCI Express* x1 bus add-in card connector

•

One PCI Express x16 bus add-in card connector

Instantly Available
PC Technology

•

Support for PCI Local Bus Specification Revision 2.3

•

Support for PCI Express Revision 1.0a

•

Suspend to RAM support

•

Wake on PCI, RS-232, front panel, PS/2 devices, and USB ports

•

Support for Intel

Quick Resume Technology Drivers (Intel

QRTD)

continued

Summary of Contents for BLKD945GPMLKR































































































Search results

Summary of Contents for BLKD945GPMLKR

Reviews:

Intel BLKD945GPMLKR, Technical Product Specification, Page: 10 / 94

Search results

Summary of Contents for BLKD945GPMLKR

Reviews: