manualshive.com logo in svg

Intel 740, Design Manual

The Yamaha 740 Owner's Manual is an essential companion for users of the Yamaha 740 model. This comprehensive and informative manual provides detailed instructions, troubleshooting tips, and maintenance guidelines to maximize the performance and longevity of your device. Download it for free, exclusively at manualshive.com.

Share
Download
background image

A

A

B

B

C

C

D

D

E

E

4

4

3

3

2

2

1

1

1.1 REVISIONS

SIGNAL GPI08 ADDED TO VMI 2X20 HEADER ON PIN Z18

FAN FAIL SIGNAL REMOVED FROM QSWITCH

OE# ON INTEL740(TM) GRAPHICS ACCELERATOR OSCILLATOR PULLED HI TO 3.3V
MEMORY ADDRESSES 8,9 AND 10 FROM INTEL740 CONNTECTED TO 9,10 AND 8 OF SODIMM CONNECTOR, RESPECTIVELY 

GPIO4 PULLED UP TO 3.3V THRU 4.7K RESISTOR

POWER SUPPLY VDDQ3 CHANGED TO VDD

1.3 REVISIONS

REMOVED 1UF CAP BETWEEN PIN 1 AND GND OF LT1575 ON P.4

ADDED 1UF CAP TO VCC3 NEAR PIN 1 OF HEXFET ON P.4

REPLACED 220UF CAP WITH 100UF CAP ON P.4
LAYOUT NOTE ADDED TO P.4

1.4 REVISIONS

SIGNAL NAMES L RED, L GREEN, L BLUE CHANGED TO L_RED, L_GREEN AND L_BLUE, RESPECTIVELY, ON P.9

SIGNAL NAMES VGA SHYNC AND VGA VSYNC CHANGED TO VGA_HSYNC AND VGA_VSYNCE ON P.9
NET NAMES CONX_20, CONX_24 AND CONX_47 ADDED TO P.13

MOUNTING HOLES FOR FAN ADDED TO P.14

FOR HIDDEN PINS OF FAN MOUNTING HJOLES ADDED TO P.1
AGND CHANGED TO GND GLOBALLY

AVCC CHANGED TO VCC GLOBALLY
ON HIDDEN PINS OF BT829ALV REMOVED FROM P.5

PROPERTY OF BT829ALV ADDED, HIDDEN PINS DESIGNATED AS ANALOG_GND CONNECT TO GND

POWER NOTES CHANGED ON P.1 TO REFLECT AGND AND AVCC REMOVAL

THE 4 GND RINGS OF FAN MOUNTING HOLES BROUGHT OUT EXTERNALLY P.14 
THE 4 NC MOUNTING HOLES ARE STILL LEFT AS HIDDEN

1.42

0 OHM RESISTOR ADDED TO GPIO4 LINE ON P.14
UNSTUFFED 0 OHM RESISTOR ADDED BETWEEN DRAIN AND SOURCE OF PMOSFET ON P.14
PINOUT CHANGED ON INTEL740(TM) GRAPHICS ACCELERATOR ON PINS SPARE2, SPARE1, LEFT, VSYNC,
HSYNC, VREF, AND VCLK.       
     NEW PIN'S ARE H25, H26, J23, J25, J26, L23, & L24 RESPECTIVELY ON P.3.  
     NO OTHER PINS AFFECTED.

1.43

ADDED DISCLAIMERS TO P.1

ADDED NOTE REGARDING HIDDEN PINS OF VGA CONNECTOR ON P.1

AGP NOTE CHANGED TO A.G.P. ON P.8

COMPATIBILITY NOTE REMOVED FROM TITLE ON P.10

512X32 SGRAMS NOTE CHANGED TO JUST SGRAMS

BUTEO TV ENCODER NOTE CHANED TO BT869 VIDEO ENCODER

POWER PINS NOTE CHANGED TO HIDDEN POWER PINS ON P.1

BT829B NOTE CHANGED TO BT829ALV VIDEO DECODER ON P.1 & 5

ADDED NOTE ON P.4 REGARDING VARYING THE OUTPUT VOLTAGE OF REGULATOR

SIGNAL NAME XTL1 CHANGED TO XT1I ONP.5, PIN16 OF BT829ALV

SIGNAL NAME XT10 CHANGED TO XT1O ON P.5, PIN17 OF BT829ALV

PULL-DOWN REISITOR ON GPIO4 REMOVED

1.2 REVISIONS

MEMORY ADDRESSES 8,9 AND 10 FROM INTEL740(TM) GRAPHICS ACCELERATOR CONNECTED TO 8,9 AND 10 OF
SODIMM CONNECTOR, RESPECTIVELY

1.41

1.44

NOTE ON HIDDEN VCC PINS FOR BT829ALV CHANGED, PIN 28 TO 38 ON P.1

POWER PLANE VDD CHANGED TO 3VAA_BT829 FOR 3 PROTECTION DIODES ON P.6

SIGNAL NAMES L_GATE, R_GATE, COMP1 M_COMP1 ADN FB1575 ADDED TO P.4

SIGNAL NAMES XT1CAP AND XT0CAP ADDED TO NETS ON P.5

SIGNAL NAMES XTALIN869, XTALOUT869, M_COMP2, COMP2, FSADJUST869, VBIAS869 AND VREF869 ADDED TO NETS ONP.6

SIGNAL NAME VMI3V ADDED TO NET ON P.7

SIGNAL NAME FANPOWER ADDED TO NET ON P.14

1.45

SIGNAL NAME CCVALID ADDED TO P.5

1.46

SIGNAL NAME GFX_OSC ADDED TO P.3
SIGNAL NAME MODE869 ADDED TO P.6, PIN 50 OF BT869
SIGNAL NAME PAL_MODE ADDED TO 1X3HDR ON P.6
SIGNAL NAME NTSC_MODE ADDED TO 1X3HDR ON P.6

1.46

NOTE STATING NEED A 10% VERSION CREATED REMOVED FROM P.8

POWER SUPLY VCC3 CHNAGED TO VCC ON C123 ON P.14

POWER SUPPLY VCC3 CHANGED TO VCC ON BIOS SKT ON P.14

SIGNAL NAME 5VSDA CHANEGD TO 3VSDA ON U9.Z13 ON P.7

AGP CONNECTOR NOTES ON PINS CHANGED ON P.8, NO SIGNAL NAMES WERE CHANGED ON THE CONNECTOR

     NAMES GAD[31:0] CHANGED TO AD[31:0], SMB1 AND SMB0 CHANGED TO RSVD

     GAD_STB0 AND GAD_STB1 CHANGED TO AD_STB0 AND AD_STB1, RESPECTIVELY

     GC-BE*3,2,1,0 CHANGED TO CBE*3,2,1,0 RESPECTIVELY

     GSTOP*, GPERR*, AND GPAR CHANGED TO STOP*, PERR*, SERR* AND PAR, RESPECTIVELY

1.5 REVISIONS

C39, C41, C42, & C44 CHANGED TO 15PF ON  P.5, NO PACKAGE SIZE CHANGE NEEDED 

SIGNALS XT1CAP AND XT0CAP RELOCATED SINCE XTAL FILTERS CHANGED ON P.5

L3 AND L4 ON P.5 CHANGED TO 4.7UH NAD LOCATION IN XTAL FILTER CIRCUIT CHANGED 

PIN 36, 37, 80, & 85 CONNECTED TO VCC3 INSTEAD OF VCC ON THE BT829ALV ON P.5

R20 ON P.5 NOW CONNECTS TO VCC3 INSTEAD OF VCC

C20, C22, C23 AND C26 ON P.5 CHANGED FROM 0.1UF TO 1UF.  THESE ARE THE AC CAPS TO MUX INPUTS.

     THIS REQUIRED A PACKAGE SIZE CHANGED FROM 0805 TO 1206.

VCC CONNECTION TO PIN 59 OF BT829B (P.5) DELETED.  WIRE LEFT OPEN AND RENAMED TP_0559.

REMOVED NOTE NEAR PIN 59 OF BT829B (P.5) WHICH STATED TIE TO ANALOG FENCE

DELETED R13, R18 & R19 FROM P.5 OF SCHEMATICS.

REPLACED C38 ON P.5 WITH A SHORT.  THE SIGNALS MUXOUT AND YIN WERE THUS REMOVED AND RENAMED 

     AS ONE SIGNAL MUXOUT_YIN

SIGNAL NAME BROMWE# REMOVED FROM P.14

GPIO7 SIGNAL NAME AND NET REMOVED FROM P.14 AND CONNECTED TO PIN Z5 OF THE 2X13 HDR ON P.7

ROMWE# SIGNAL NO LONGER USES 74LVT125 ON P.14 BUT CONNECTS DIRECTLY TO BIOS PIN 31

PULL-UP RESISTOR TO VCC3, R13, ADDED ON P.14 AND CONNECTED TO THE ROMWE# SIGNAL

SIGNAL NAME TP_0709 REMOVED FROM 2X13 HDR ON P.7 AND CHANGED TO GPOI7

R63 ON P.6 CHANGED FROM 75 TO 100 OHMS

R62 REMOVED AND REPLACED BY A SHORT ON P.6

SIGNAL NAME M_COMP2 REMOVED FROM P.6

C112 REMOVED FROM P.6

BT829ALV NAME CHANGED TO BT829B ON P.1 AT 2 PLACES AND P.5 AT 2 PLACES

BT868, 869 TV OUT NOTE ON P.2 CHANGED TO VIDEO ENCODER

AGP CONNECTOR NOTE ON P.2 CHANGED TO A.G.P. CONNECTOR

1.6 REVISIONS

ALL REFERENCE DESIGNATORS CHANGED
HIDDEN POWER PINS NOTATION ON P.1 CHANGED

1.61 REVISIONS

50 PIN VIDEO PINOUT CHANGED ON P.13, PIN 1 NEEDED TO CHANGE DUE TO PAD PATTERN DEFINITION

DIAGRAM SHOWING THE PHYSICAL PINOUT OF THE 50 PIN VIDEO CHANGED ACCORDINGLY ON P.13

NOTE ON P.4 WHICH STATED ...R10 WITH THE ... CHANGED TO ...R35 WITH THE...

NOTE ON P.4 WHICH STATED ...R10   VOUT... CHANGED TO ...R35    VOUT...

NOTE ON P.4 WHICH STATED ...C12 TO C11... CHANGED TO ...C60 TO C61...

C21, C22, C33, & C34 ON P.5 CHANGD TO 22PF CAPS, SAME PACKAGE SIZE

L3 AND L6 ON P.5 CHANGED TO 2.7UH, SAME PACKAGE SIZE

C23 ON P.5 CHANGED TO 68PF, SAME PACKAGE SIZE

C35 ON P.5 CHANGED TO 100PF, SAME PACKAGE SIZE

REF DESIGNATOR FOR C16 ON P.4 CHANGED TO C40

REF DESIGNATOR FOR C40 ON P.5 CHANGED TO C16

1.7 REVISIONS

20K PULL-DOWN RESISTOR TO GND ADDED TO GPIO8 SIGNAL ON P.3

PINS F01, AA01, F04 & AA04 REMOVED FROM HIDDEN PINS OF INTEL740(TM) GRAPHICS ACCELERATOR CONNECTED TO VCC3 ON

P.1

PINS F01, AA01, F04 & AA04 ADDED TO INTEL740(TM) GRAPHICS ACCELERATOR SYMBOL AND CONNECTED TO SIGNAL VCC_PLL

ON P.3

VCC2 NOTES ON P.1 CHANGED TO VCC_CORE TO REFLECT THE CORE POWER SUPPLY CHANGED ON P.4

HIDDEN INTEL740(TM) GRAPHICS ACCELERATOR PINS WHICH WERE CONNECTED TO VCC2 CHANGED TO CONNECT TO VCC_CORE

     THE FOLLOWING ARE HIDDEN PINS WHICH WERE CONNECTED TO VCC2 CHANGED TO CONNECT TO VCC_CORE

     E07, E09, E11, E13, E14, E16, E18, H22, AB07, AB09, AB11, AB13, AB14, AB16, AB18, AB20

OUTPUT OF REGULATOR SIGNAL NAME CHANGED TO VCC_REGULATED FROM VCC2 ON P.4

TWO 0 OHM RESISTORS ADDED, BOTH CONNECTED TO VCC_CORE, ONE CONNECTED TO VCC_REGULATED, 

     THE OTHER VCC3 ON P.4

ANOTHER TWO 0 OHM RESISTORS ADDED, SMALLER PACKAGE, BOTH CONNECTED TO VCC_PLL

     ONE CONNECTED TO VCC_REGULATED, THE OTEHR VCC3 ON P.4

ADDED ON P.4 TO DESCRIBE THE RESISTOR STUFFING OPTIONS FOR CORE AND PLL POWER 

CHANGED PMOSFET ON P.14 FROM A 3 PIN DEVICE TO A 4 PIN DEVICE, THE MIDDLE PIN (2) AND THE 

     TAB (4) ON TEH PHYSICAL DEVICE ARE ELECTRICALLY THE SAME, BOTH ARE DRAINS

VCC2 POWER SYMBOL CONNECTED TO DECOUPLING CAPACITORS ON P.4 CHANGED TO VCC_CORE'

     VCC2 NO LONGER EXISTS

1.8 REVISIONS

REFERENCE DESIGNATORS CHNAGED ACCORDING TO PHYSCIAL LOCATION ON BOARD BY LAYOUT COMPANY

1.9 REVISIONS

NOTES ON REFERENCE DESIGNATORS ON PAGE 1 UPDATED
NOTE REGARDING 0 OHM STUFFING OPTIONS ON P.4 CHANGED
NOTE REGARDING DEFAULT POWER CONFIGURATION ADDED TO P.4
HIDDEN RULE ON AD<31:0> CHANGED TO HIDDEN

2.0 REVISIONS

OSC Y3 VALUE CHANGED TO 66.6667MHz (p.4)

2.1 REVISIONS

Made Power Pins Visible and changed names to match the Datasheet,
Swapped pin numbers for WEA# and WEB# (p.3,4)

Pin A3 on AGP connector disconnected from Ground,
changed VDD to VDDQ (p.9)

Added descriptive text to Fan control, made
power pins visible (p.15)

Changed VCC3 voltages on part to 3VAA_BT869,
Changed R58 to 100 ohms (p.7)

Made power pins visible (p.6)

Made power pins visible (p.11)

Made power pins visible  (p.13)

Made power pins visible, Changed Clock Routing  (p.12)

Intel740(TM) Graphics Accelerator Reference Card

2.1

Revision History

C

16

16

Thursday, April 09, 1998

Title

Size

Document Number

Rev

Date:

Sheet

of

Summary of Contents for 740























































































































































































































































Reviews:

No comments

Related manuals for 740

IBM T221 Installation Manual preview
T221
Brand: IBM Pages: 38
Qdis QVI-LVTX-1CH-V7 Specifications & Installation preview
QVI-LVTX-1CH-V7
Brand: Qdis Pages: 19
IEI Technology IVC-8371P User Manual preview
IVC-8371P
Brand: IEI Technology Pages: 59
NuDAQ PCI- 9113A User Manual preview
PCI- 9113A
Brand: NuDAQ Pages: 87
FAAFTECH FT-VF-FRD3 Installation Manual preview
FT-VF-FRD3
Brand: FAAFTECH Pages: 12
SIIG Cyber 2S1P PCIe Quick Installation Manual preview
Cyber 2S1P PCIe
Brand: SIIG Pages: 12
Audiovox VM9312 Instruction Manual preview
VM9312
Brand: Audiovox Pages: 36
Sune Technology SUNE10 PLUS-20ALPHARD/20 LM300h Installation Manual preview
SUNE10 PLUS-20ALPHARD/20 LM300h
Brand: Sune Technology Pages: 9
Lava Lava Parallel LAVA SP-PCIe Datasheet preview
Lava Parallel LAVA SP-PCIe
Brand: Lava Pages: 1
Quectel LTE-A&5G Series User Manual preview
LTE-A&5G Series
Brand: Quectel Pages: 39
VDO MCF 5401 - Datasheet preview
MCF 5401 -
Brand: VDO Pages: 2
Addi-Data APCIe-040 Technical Description preview
APCIe-040
Brand: Addi-Data Pages: 31
Phonocar 1/401 Installation Instructions Manual preview
1/401
Brand: Phonocar Pages: 6
Phonocar 05962 Installation Instructions Manual preview
05962
Brand: Phonocar Pages: 12
3Dlabs Wildcat II 5110 User Manual preview
Wildcat II 5110
Brand: 3Dlabs Pages: 57
Boss Audio Systems BV650M User Manual preview
BV650M
Brand: Boss Audio Systems Pages: 10
3Dlabs Oxygen GVX1 Pro User Manual preview
Oxygen GVX1 Pro
Brand: 3Dlabs Pages: 34
HIS Excalibur RADEON 9550 Series User Manual preview
Excalibur RADEON 9550 Series
Brand: HIS Pages: 34

Brands by name

Popular brands

Load more brands