Intel 520J - Pentium 4 2.80GHz 800MHz 1MB Socket 775 CPU, Datasheet

Page: 35 / 96

Datasheet 35
Package Mechanical Specifications
3
Package Mechanical
Specifications
The Pentium 4 processor in the 775-land package is packaged in a Flip-Chip Land Grid Array
(FC-LGA4) package that interfaces with the motherboard via an LGA775 socket. The package
consists of a processor core mounted on a substrate land-carrier. An integrated heat spreader (IHS)
is attached to the package substrate and core and serves as the mating surface for processor
component thermal solutions, such as a heatsink.
Figure 3-1 shows a sketch of the processor
package components and how they are assembled together. Refer to the LGA775 Socket
Mechanical Design Guide for complete details on the LGA775 socket.
The package components shown in Figure 3-1 include the following:
•
Integrated Heat Spreader (IHS)
•
Thermal Interface Material (TIM)
•
Processor core (die)
•
Package substrate
•
Capacitors
NOTE:
1. Socket and motherboard are included for reference and are not part of processor package.
3.1 Package Mechanical Drawing
The package mechanical drawings are shown in Figure 3-2 and Figure 3-4 . The drawings include
dimensions necessary to design a thermal solution for the processor. These dimensions include:
•
Package reference with tolerances (total height, length, width, etc.)
•
IHS parallelism and tilt
•
Land dimensions
•
Top-side and back-side component keep-out dimensions
•
Reference datums
All drawing dimensions are in mm [in].
Note: Guidelines on potential IHS flatness variation with socket load plate actuation and installation of
the cooling solution is available in the processor Thermal/Mechanical Design Guidelines.
Figure 3-1. Processor Package Assembly Sketch
IHS
Substrate
LGA775 Socket
System Board
Capacitors
Core (die)
TIM
IHS
Substrate
LGA775 Socket
System Board
Capacitors
Core (die)
TIM