Importing a certificate from a file
1. Open Internet Properties (right-click on the Internet Explorer icon on the desktop
and select Properties.
2. Click the
Certificates
button on the Content page. This will open the list of installed
certificates.
3. Click the
Import
button under the list of certificates. This will start the Certificate
Import Wizard. (Note: Steps 1 through 3 may also be accomplished by double-
clicking the icon for the certificate.
4. Select the file and proceed to the Password page.
5. On the Password page specify your access password for the file. Clear the Enable
strong private key protection option.
6. On the Certificate store page select "Automatically select certificate store based on
the type of certificate" (the certificate must be in the User accounts Personal store
to be accessible in the Configure dialog of the Client; this will happen if ‘automatic’
is selected).
7. Proceed to "Completing the Certificate Import" and click the
Finish
button.
The following example describes how to use WPA with TKIP encryption using
TTLS or PEAP authentication.
Setting up the Client for TLS authentication
Step 2: Specifying the certificate used by Intel(R) PROSet
1. Obtain and install a client certificate, refer to
Step 1
or consult your system
administrator.
2. From the
General
page, click the
Networks
tab.
3. Click the
Add
button.
4. Enter the profile and network (SSID) name.
5. Select
Infrastructure
for the operating mode.
6. Click
Next
.
7. Select
Open
for the Network Authentication. You can also select any other
available authentication mode.
8. Select
WEP
as the Data Encryption. You can also select any other available
encryption type.
9. Click the
802.1x Enabled
checkbox.
10. Set the authentication type to
TLS
to be used with this connection.
11. Click the
Configure
button to open the settings dialog.
