Intel 2200BG User Manual Download Page 11

Page: 11 / 84

Back to Contents Page

Software Installation: Intel(R) PRO/Wireless
2200BG User's Guide

Software Installation

Installing Drivers and Intel(R) PROSet Software

See the instructions for your operating system:

●

Windows 2000

●

Windows XP

Installation under Windows* 2000

Preliminary Notes

The installation instructions in this section are based on the following assumptions:

●

The wireless adapter hardware has already been installed in the computer in
accordance with the computer manufacturer's instructions.

●

The computer has not been powered on since the hardware installation was
completed.

●

No other wireless LAN card is installed in this computer.

To install the driver before installing hardware, use

Start > Run

and browse to the

file

SetupWLD.exe

in the path

PROW2200\WIN2K

on the Intel CD. After running

SetupWLD.exe, shut down the computer and install the hardware. When the computer
restarts, the driver will be automatically installed.

Summary of Contents for 2200BG





















































































Search results

Summary of Contents for 2200BG

Reviews:

Intel 2200BG, User Manual, Page: 11 / 84

Search results

Summary of Contents for 2200BG

Reviews: