background image

13

6

Shortcut Operations

CTCSS SCAN

Repeatedly press 

 key  until LCD 

displays 

 and 

 icons ,then hold 

 

key for 1S to enter into CTCSS scanning. 

will stop for 15s then scan again.

 

 

 

 

This operation can be temporarily used by user. Once 

Once the

 

radio is turned off  or switched to another channel,

 

 

the temporary setting will be erased.

When LCD appears 

3. 

 iron, it means current channe can be set 

with DCS encode and decode together, turn selector knob or press 
Microphone's [ 

 / 

 ] to select desired DCS encode and 

decode.

CTCSS:62.5-254.1, Total 51groups; DCS:000N-777I total 1024 

4. 

groups. N is positive code, I is inverse code.

Press any key except 

5. 

,  

 and 

 keys to return into 

standby status.            

Repeatedly press 

 key  until LCD 

displays DCS icons ,then hold 

 key for 

a matching DCS signaling ,it will stop for 15s 
then scan again.

compander function.

Press 

 key until LCD display   iron, 

then press 

 key to switch between high/

Mid/low power. The LCD appears:

None: Transmit in high power

: Transmit in middle power

: Transmit in low power

Compander function will decrease the background noise and enhance 

audio clarity, especially in long range communication.

Press

1. 

 

       key, then press       key to 

turn on compander function, repeat 
above operation again to turn off 

HIGH/MID/LOW Power Switch  (*)

Compander (decrease the background noise and
enhance audio clarity)

 

When LCD appears 

2. 

 iron, enable 

compander in current channel.

When LCD doesn't display 

3. 

 iron, 

disable compander in current channel.

DCS SCAN

CTCSS and DCS functions must be set in programming software.

CTCSS and DCS SCAN must be set in programming software.

This function must be set in programming software.

This function must be set in programming software.

(*)  This feature is subject to the regulations applied in the country where the product

is used

Summary of Contents for TM-200S









































Reviews: