14
Press key until LCD displays
1.
icon, then press key until, LCD
displays
icon, it indicates keypad
lockout function is valid.
This will automatically transmit pre-programmed and stored DTMF
tones. And they are often used to remote control electronic devices or
AUTOPATCH phone systems available on some repeater.
Press and hold
1.
key, then press
key to enter the
auto-dialer enquiry mode, LCD displays current default data and
current group displayed on left. If no data in current group,it
shows"EMPTY".
Press and hold key, then press
1.
key, LCD displays current battery
voltage.
Repeat above operation to return into
2.
VFO or Channel mode
6
Avoiding unintentional operation, this function will lock main keys, all
keys except ,
and key are invalid.
Keypad Lockout
Current Voltage ENQUIRY
Auto-Dialer Setup
Shortcut Operations
In voltage display mode, all functions and channel selection
are invalid.
This function will display Current Battery Voltage.
Repeat above operation,
2.
icon disappears, it indicates keypad
lockout function is invalid.
This function must be set in programming software.
This function must be set in programming software.
Turn selector knob to choose group you
2.
desired. Total:16 group,01-16.
Press
3.
key to enter into editing of
current group,press MIC's numeric
keys to set your desired data.
The display scrolls when the 7th digit
4.
is entered. The numbers 0-9, --, A-D, *
and # can be stored up to a total of 23
digits.
After editing,press PTT or
5.
key to send current group and store
edited DTMF signaling. Press
to exit and store.
Press
1.
key, then press
key to
enter into auto-dialer enquiry
Turn selector knob to select desired
2.
transmitting group
P r e s s P T T o r
3.
k e y t o t r a n s m i t
current selected DTMF tones.
Transmitting Edited DTMF tones
in the Auto-dialer memory
