- 10 -
3.
Setpoint Adjust — Instruments with an FCP in the serial number are controlled by an
onboard potentiometer. To adjust this potentiometer, unscrew the enclosure window and use
a small tweaker or screwdriver to turn the dial up or down. Instruments with an FCE in the
serial number use a 0-5v analog input to control the setpoint. This signal is sent over the blue
and white wires, with blue as ground and white as the signal wire.
3.4
OUTPUT CURVE
The Figure in the Custom Information Section is the final linearized flow output curve for your unit.
The instrument has been calibrated over the actual flow rate range indicated on the ordinate (Y axis).