TERMINAL DESCRIPTION(5/8)
Q8001: FLI8125-LF-BC (Video Processor)
IC BLOCK DIAGRAMS AND TERMINAL DESCRIPTIONS -49
DTR-7.8
Pin Name
No
I/O
Description
GPIO13/PWM2
51
IO
This Pin can be programmed to give out Pulse Width Modulated Output Pulses for
external use. Else, this pin is available as General Purpose Input/output Port.
GPIO14/PWM3/
SCART16
52
IO
This Pin can be programmed to give out Pulse Width Modulated Output Pulses for
external use. Or it can be programmed to sense the Fast Blank Input signal from a
SCART I/P source. Else, this pin is available as General Purpose Input/output Port.
TDO
55
O
This Pin provides the Output Data in case of Boundary Scan Mode.
HSYNC1
156
I
Horizontal Sync signal Input-1. Used when Analog RGB component signal carries
separate HSYNC signal. Has programmable Schmitt trigger.
VSYNC1
157
I
Vertical Sync signal Input-1. Used when Analog RGB component signal carries separate
VSYNC signal. Has programmable Schmitt trigger.
XOSD_CLK
101
O
Clock Output meant for External OSD Controller
XOSD_HS
102
O
Horizontal Sync Output meant for External OSD Controller
XOSD_VS
103
O
Vertical Sync Output meant for External OSD Controller
XOSD_FLD
104
O
Field Signal Output meant for External OSD Controller
PD20/B4/GPIO0
PD21/B5/GPIO1
PD22/B6/GPIO2
PD23/B7/GPIO3
86
87
88
89
IO
These Pins provide the Panel Data as shown in the TTL Display Interface Table below.
These are available as General Purpose Input / Output Pins when not used as Panel
Data.
LVDS Display Interface
Pin Name
No
I/O
Description
PBIAS
53
O
Panel Bias Control (backlight enable) [Tri-state output, 5V- tolerant]
PPWR
54
O
Panel Power Control [Tri-state output, 5V- tolerant]
AVDD_LV_33
56
DP
Digital Power for LVDS Block. Connect to digital 3.3V supply.
VCO_LV
57
O
Reserved. Output for Testing Purpose only at Factory.
AVSS_LV
58
G
Ground for LVDS outputs.
AVDD_OUT_LV_33
59
DP
Digital Power for LVDS outputs. Connect to digital 3.3V supply.
CH3P_LV_E
60
O
CH3N_LV_E
61
O
These form the Differential Data Output for Channel – 3 (Even).
CLKP_LV_E
62
O
CLKN_LV_E
63
O
These form the Differential Clock Output Even Channel.
CH2P_LV_E
64
O
CH2N_LV_E
65
O
These form the Differential Data Output for Channel – 2 (Even).
CH1P_LV_E
66
O
CH1N_LV_E
67
O
These form the Differential Data Output for Channel – 1 (Even).
CH0P_LV_E
68
O
CH0N_LV_E
69
O
These form the Differential Data Output for Channel – 0 (Even).
AVSS_OUT_LV
70
G
Ground for LVDS outputs.
AVDD_OUT_LV_33
71
DP
Digital Power for LVDS outputs. Connect to digital 3.3V supply.
CH3P_LV_O
72
O
CH3N_LV_O
73
O
These form the Differential Data Output for Channel – 3 (Odd).
CLKP_LV_O
74
O
CLKN_LV_O
75
O
These form the Differential Clock Output Odd Channel.
CH2P_LV_O
76
O
CH2N_LV_O
77
O
These form the Differential Data Output for Channel – 2 (Odd).
CH1P_LV_O
78
O
CH1N_LV_O
79
O
These form the Differential Data Output for Channel – 1 (Odd).
CH0P_LV_O
80
O
CH0N_LV_O
81
O
These form the Differential Data Output for Channel – 0 (Odd).
System Interface
