ADJUSTMENT PROCEDURES-5
VIDEO PROCESSOR CALIBRATION
DTR-7.8
Video processor Q8001 must be calibrated before mounting on the unit.
1. Press and hold down
2. Press
AUX
button within 5 seconds above.
CD
button, then press
button.
STANDBY/ON
"
Test - _
" will be displayed only for 5 seconds.
[Procedure]
[When]
[Preparation]
1. Exchange Video processor IC (Q8001,
FLI8125-LF-BC, HUDSON
).
2. Exchange HDMI PC board ass'y (NAHDM-9107).
1. Prepare a standard video signal generator(SG).
3. Connect the unit(DTR-7.8) and SG as shown in the figure.
2. Set the SG to output 100% color bar of 8 colors and 480i at component video terminals.
Component
Video Cable
Component
Video Input
Component
Video output
AV Receiver
Video Signal
Generator(SG)
IN1
3. Press
ENTER
button.
5. The unit will be powered off automatically when succeeds.
6. If failed, “ Calibration Error ” will be displayed.
Check SG and video signal, then return to Item 1.
4. Calibration of ADC part in Q8001
FLI8125-LF-BC starts and proceeds.