14
Step 3:
Playing Back
AccuEQ Room Calibration
: Disables the sound field
set in the automatic speaker setting. The setting can be
separately set to each input.
This setting cannot be selected if the automatic
speaker setting has not been performed.
It cannot be set if headphones are connected or the
listening mode is Direct.
Late Night
: Make small sounds to be easily heard. It
is useful when you need to reduce the volume while
watching a movie late night. You can enjoy the effect
on Dolby Digital, Dolby Digital Plus and Dolby TrueHD
sources only.
Turning the unit to standby mode will set the setting
to "Off". In case of Dolby TrueHD, the setting will be
set to "Auto".
You cannot use the function during Dolby TrueHD
playback if "Setup" - "3. Audio Adjust" - "Dolby" -
"Loudness Management" is set to "Off".
Music Optimizer
: Improve the quality of the
compressed audio. Playback sound of lossy compressed
files such as MP3 will be improved. The setting can be
separately set to each input.
The setting is effective in the signals of 48 kHz or
less. The setting is not effective in the bitstream
signals.
It cannot be set if the listening mode is Direct.
Re-EQ, Re-EQ (THX)
: Adjust the soundtrack that was
processed to enhance its treble, in order to make it
suitable for home theater.
In Re-EQ, the following listening modes can be used:
Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
Multichannel, DTS, DTS-ES, DTS Neo:6 Cinema,
DTS 96/24, DTS Neo:6, DTS-HD High Resolution
Audio, DTS-HD Master Audio and DTS Express.
In Re-EQ (THX), the following listening modes can
be used: THX Cinema, THX Surround EX, and THX
Select2 Cinema.
Video
:
Monitor Out
: The video input signals input to the unit
will be converted by the unit when they are output from
the HDMI OUT jack to the TV so that their resolution can
match that of the TV used. Select the HDMI OUT jack to
be used for output.
Wide Mode
: You can set the aspect ratio.
Picture Mode
: You can adjust the image quality.
"Cinema" will automatically adjust the image to be
suitable to watch movie and "Game" suitable to play
game. In "Standard", the resolution will be changed but
the image quality will not be adjusted. In "Custom", "ISF
Day" and "ISF Night", you can adjust the brightness,
contrast, hue and saturation as desired. If you do not
adjust the resolution and image quality, select "Bypass".
"Wide Mode" and "Picture Mode" can be set only on
the video output from the HDMI OUT MAIN jack.
"Video" cannot be selected if the input is "NET" or
"USB".
Information
:
Audio
: Displays the audio input source, format, number of
channels, sampling frequency, listening mode, number of
output channels, and other audio information.
Video
: Displays the video input source, resolution, signal
format, color tone, 3D information, Aspect, Picture Mode,
output, and other Video information.
Tuner
: Displays the band, frequency, preset number, and
other tuner (radio) information.
Listening Mode
: Select the listening mode from the
categories of "MOVIE/TV", "MUSIC", "GAME" and "THX".
It cannot be set when audio is played from the TV's
speakers.
5
Using the multi-zone function
The function allows you to connect the unit with a TV or
audio equipment placed in a separate room so that you can
enjoy audio and video of the connected equipment even if
you are staying in a different room. It is possible to perform
playback in the main room and a separate room at the
same time, for example by playing the Blu-ray Disc player
in the main room where the unit is placed while playing
Internet radio in a separate room. It is also possible to
perform playback only in a separate room. There are three
methods to configure multi-zone connection as described
in "a" to "c" in the next section. Simultaneous playback in all
zones is also possible.
Zone 2
Zone 3
Main room
