Integra DTR-30.5, Instruction Manual

Page: 45 / 96

Playback
En-45
You can adjust the brightness of the AV receiver’s
display.
When you connect an u -capable Integra/Onkyo
component, you must configure the input display so
that
u can work properly.
This setting can be done only from the front panel.
You can temporarily mute the output of the AV
receiver.
Setting the Display Brightness
1
Press Receiver once followed by Dimmer
repeatedly to switch between: normal, dim, or
dimmer brightness.
Tip
• (North American models) Alternatively, you can use
Dimmer on the AV receiver.
Changing the Input Display
1
Press TV/CD or Game.
“ TV/CD ” or “ GAME ” appears on the AV receiver’s
display.
2
Press and hold down the same button (about
3 seconds) to change the input display.
Repeat this step to select the desired input
display.
Note
“
• “ DOCK ” can be selected for the “ TV/CD ” or “ GAME ”
input selector, but not at the same time.
• Enter the appropriate remote control code before using
the remote controller for the first time (
➔
page 73 ).
TV/CD
→
DOCK
→
→
TAPE
■
TV/CD:
GAME
↔
DOCK
■
Game:
Muting the AV Receiver
1
Press Receiver followed by Muting.
The output is muted and the MUTING indicator
flashes on the AV receiver’s display.
Tip
• To unmute, press Muting again or adjust the volume.
• Muting is automatically cancelled when the AV
receiver is set to standby.