Integra DTM-7 Instruction Manual Download | Manualshive

Page: 6 / 61

background image

6

Rear Panel

1. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals

with a digital optical cable or digital coaxial cable.

2. ETHERNET jack: Connect to the network with an Ethernet cable.
3. USB jack: A USB storage device is connected so that music files stored in it can be

played. You can also supply power (5 V/500 mA) to USB devices with a USB cable.

4. Wireless antenna: Raise for Wi-Fi connection or when using a BLUETOOTH wireless

technology enabled device. Adjust their angles according to the connection status.

5. TUNER AM/FM 75

≠

terminals: The supplied antennas are connected.

6. HDMI OUT jack: Connect a HDMI cable to transfer video signals and audio signals to a

TV.

7. HDMI IN jacks: Input video signals and audio signals with a HDMI cable connected to an

AV component.

8.

REMOTE CONTROL jack: An Onkyo product with RI jack can be connected and

synchronized with this unit (P13).

9. IR IN/OUT terminals: Connected to the multi-room remote control kit. (*)
10.12V TRIGGER OUT A/B jacks: Allows you to connect a device with 12V trigger input jack

to enable link operation between the device and the unit (P40, 41). (*)

11. RS232 port: For connection to the home control system. (*)

(*)Special devices or cable connections are necessary to use the control functions 9 to 11.
Contact the specialized stores for more information.

12.AC INLET: Connect the supplied power cord.
13.GND jack: The ground wire of the turntable is connected.
14.AUDIO IN jacks: Input AV component audio signals with an analog audio cable.
15.ZONE 2 LINE OUT jacks: Output audio signals with an analog audio cable to a pre-main

amplifier in a separate room (ZONE 2).

16.SUBWOOFER PRE OUT jacks: Connect a powered subwoofer with a subwoofer cable.

> Before Start

> Part Names

> Initial Setup

Advanced Setup | Supplementary Information | Others

180°

90°









 









  













«
...
4
5
6
7
8
...
»

Summary of Contents for DTM-7






























































Reviews:

No comments

Related manuals for DTM-7

Brand: Harman Kardon Pages: 20

Brand: Harman Kardon Pages: 20

Brand: Harman Kardon Pages: 2

Brand: Harman Kardon Pages: 146

Brand: Harman Kardon Pages: 2

Brand: Harman Kardon Pages: 64

Brand: Harman Kardon Pages: 4

Brand: Harman Kardon Pages: 187

Brand: Harman Kardon Pages: 187

Brand: Harman Kardon Pages: 10

Brand: Harman Kardon Pages: 2

Brand: Harman Kardon Pages: 48

The Counterpoint A-400

Brand: Harman Kardon Pages: 5

Brand: Harman Kardon Pages: 24

Brand: L&S Pages: 5

Brand: MAC Audio Pages: 20

Brand: Icom Pages: 73

New Jersey MP68

Brand: Blaupunkt Pages: 400

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands