47
En
Firmware Update
The updating function on this unit
This unit has functionality to update the firmware (the
system software) over a network or by the USB port. This
enables us to make improvements to a variety of operations
and to add features.
How to update
There are two methods for updating the firmware: via
network and via USB. The update may take about 20
minutes to complete for either method: via network or via
USB. Furthermore, settings you have changed are
maintained regardless of the method used for update.
Note that when this unit is connected to a network, you may
see notifications about firmware updates on the display. To
execute updating, select "Update Now" with the cursors of
the remote controller and press Enter. "Completed!" is
displayed when the update is complete.
0
For the latest information on updates, visit our website.
There is no need to update the firmware on this unit if
there is no update available.
0
During an update, do not:
– Disconnect and reconnect any cable or USB storage
device, headphones, or perform any operation on the
component such as turn off its power
– Accessing this unit from a PC or smartphone using an
application
Disclaimer
: The program and accompanying online
documentation are furnished to you for use at your own
risk.
We will not be liable and you will have no remedy for
damages for any claim of any kind whatsoever concerning
your use of the program or the accompanying online
documentation, regardless of legal theory, and whether
arising in tort or contract.
In no event will we be liable to you or any third party for any
special, indirect, incidental, or consequential damages of
any kind, including, but not limited to, compensation,
reimbursement or damages on account of the loss of
present or prospective profits, loss of data, or for any other
reason whatsoever.
Updating the Firmware via Network
0
Check that the unit is turned on, and the connection to
the Internet is secured.
0
Turn off the controller component (PC etc.) connected to
the network.
0
Stop any playing Internet radio, USB storage device, or
server content.
0
If the multi-zone function is active, turn it off.
0
When "5. Hardware" - "HDMI" - "HDMI CEC" is set to
"On" in the Setup menu, set to "Off".
0
The description may differ from the on-screen display but
that will not change operations or functionality.
1. Switch the input on the TV to that assigned to the unit.
2. Press Setup on the remote controller.
3. Select "7. Miscellaneous" - "Firmware Update" -"Update
via NET" with the cursors in order and press Enter.
0
If "Firmware Update" is grayed out and cannot be
selected, wait for a while until it starts up.
0
You will not be able to select "Update via NET" if there
is no firmware update.
> Install
> Playback
| Supplementary Information | Others
Setup
1. Input/Output Assign
2. Speaker
3. Audio Adjust
4. Source
5. Hardware
6. Multi Zone
7. Miscellaneous
1. TV Out / OSD
2. HDMI Input
3. Digital Audio Input
4. Analog Audio Input
Setup
1. Tuner
2. Firmware Update
3. Initial Setup
4. Lock
1. Input/Output Assign
2. Speaker
3. Audio Adjust
4. Source
5. Hardware
6. Multi Zone
7. Miscellaneous
