Integra DBS-50.3, Instruction Manual

Page: 49 / 72

EN
49
12.4 HDMI Output
[Home ] Ȼ “Settings” Ȼ “HDMI” Ȼ “HDMI Output”
You can set the video and audio output settings from
HDMI OUT MAIN and SUB jacks.
“Main”
Outputs both of video and audio signals from
HDMI OUT MAIN jack only.
“Dual (Main and Sub)”
Outputs video and audio signals from both of
HDMI OUT MAIN and HDMI OUT SUB jacks.
“AV Split (Main:V, Sub:A)”
Outputs video signals from HDMI OUT MAIN jack and
audio signals from HDMI OUT SUB jack.
D Note
• To enable “HDMI Output”, it is necessary that both
HDMI OUT MAIN and HDMI OUT SUB jacks are
connected with other HDMI devices and this unit
should obtain EDID (Extended Display Identification
Data).
• When “HDMI Output” is set to “Main”, there
will be no output from the HDMI OUT SUB jack.
• HDMI video resolution will normally be as selected in
“Video Resolution” except when “HDMI Output” is
set to “Dual (Main and Sub)” and “Video Resolution”
is set to “Source Direct” or “Auto”. When the
unit is set to these settings video and audio from
HDMI OUT MAIN and SUB jacks will be the same by
EDID.
• When playing 3D contents with the unit set to
“AV Split (Main:V, Sub:A)”, a compatible display device
and AV receiver/amplifier must be connected to the
unit. Without a compatible device audio output will
not occur.
• When set to “HDMI Output”, unplugging the
HDMI OUT MAIN or HDMI OUT SUB jack will clear
settings.
• Only remove HDMI cables when this unit is in standby
mode. Do not unplug cables when outputting video
and audio signals from HDMI OUT MAIN and SUB
jacks.
• The video output from HDMI OUT SUB jack and
the video output which “HDMI Output” is set to
“Dual (Main and Sub)” are not THX certified.
12.5 Video Resolution
[Home ] Ȼ “Settings” Ȼ “HDMI” Ȼ “Video Resolution”
Set the resolution of the video signal being output from
the HDMI OUT jack.
You can select the desired “Video Resolution” among the
settings listed below:
“Auto”, “480i”, “480p”, “720p”, “1080i”,
“1080p”, “1080p/24”, “Source Direct”.
Actual Output Resolution by Media:
Setting in the
“Video Resolution”
Source
480i/60 720p/60 1080i/60 720p/24 1080p/24
480i 480i/60
480p 480p/60
720p 720p/60
1080i 1080i/60
1080p 1080p/60
1080p/24 1080p/60 1080p/24
Source Direct
HDMI video resolution will be set to the
recorded resolution of a playback media.
Auto
The highest or recommended resolution
supported by your display device will be in
effect automatically. “Auto” is affected by the
“HDMI Auto Format” setting.
The table below describes the available output resolution
when “Video Resolution” is set to “Source Direct”.
Media
Source
480i 480p 720p 1080i 1080p 1080p24
BD-video Ɛ Ɛ Ɛ Ɛ Ɛ Ɛ
AVCHD Ɛ Ɛ Ɛ Ɛ Ɛ –
DVD-video Ɛ – – – – –
JPEG – Ɛ Ɛ – Ɛ –
DLNA Video Ɛ Ɛ Ɛ Ɛ – –
Ɛ
: available
–
: not exist
• Composite video output (VIDEO) jack can only output
480i.
• For AVCHD, outputting the video in 24 frames per
second (1080p/24) is not available.
• Even if “Video Resolution” is set to “Source Direct”,
HDMI video resolution will be changed when your TV
is not compatible with the video resolution of a disc
material.
E5WF0UD̲EN̲Book.indb 49 2011/07/21 10:16:04