Integra DBS-50.3, Instruction Manual

Page: 48 / 72

EN
48
ɶ Channel Level
Sets the volume for each speaker.
• The test tone is output only from the speaker you
selected on the list.
Item Adjustment range Default setting
Front Lch
-12 dB ~ 0 dB 0 dB
Center
Subwoofer
Front Rch
Surround Rch
Surround Back Rch
Surround Back Lch
Surround Lch
Default Reset “Channel Level” setting to the default.
ɶ Speaker Size
Selects the desired speaker to set. Then change the setting
appropriately by referring to the descriptions.
• When “Front” is set to “Small”, “Subwoofer” will be
set to “On” (“Off” is not available.) and “Center”,
“Surround” and “Back” cannot be set to “Large”. If
they are set to “Large”, those settings will be changed
to “Small” automatically.
• When “Surround” is set to “Small”, “Surround Back”
cannot be set to “Large”. If it is set to “Large”, the
setting will be changed to “Small” automatically.
When “Surround” is set to “None”, “Surround Back”
is automatically set to “None”.
• If you connect to 5.1-channel surround system, do not
connect to SURR BACK L / R (surround back L / R)
jacks, then set “Surround Back” in “Speaker Size” to
“None”.
Item Adjustment range Default setting
Front Large, Small Large
Center Large, Small, None Large
Subwoofer On, Off On
Surround Large, Small, None Large
Surround Back Large, Small, None Large
Default Reset “Delay Time” setting to the default.
12.3 HDMI CEC
[Home ] Ȼ “Settings” Ȼ “HDMI” Ȼ “HDMI CEC”
HDMI CEC allows integrated system control over HDMI
and is part of the HDMI standard. This function may not
work properly depending on the device connected to the
unit. When “HDMI CEC” setting is set to “On”, functions
listed below will be available.
ɶ One Touch Play
HDMI CEC operations are performed using remote
control buttons. The TV will automatically be turned on
and switched to the appropriate input source signal.
Buttons for one touch play:
– [ B (play)] , [
H
(skip)] , [
G
(skip)] ,
[the Number buttons] , [Home ] , or
[Display]
– [Top Menu] or [Pop Up Menu / Menu]
(when a disc is inserted in the unit)
ɶ One Touch Standby
When you press and hold [ . (on/standby)] for 2
seconds, it will turn off the power to the TV first and then
turn off the power to this unit.
When the connected HDMI CEC compatible display
device is turned off first, this unit will be turned off
subsequently.
ɶ System Information
Get & Set Menu Language
The unit recognizes the OSD language set on the TV and
automatically sets the same language as the player menu
language (OSD menu language) for this unit. Refer to the
“Player Menu” on page 43 for available languages.
• This feature is available only when “Auto” is selected
in the “Player Menu” section in the setup menu.
D
Note
• HDMI CEC function is only available for HDMI OUT MAIN
jack.
E5WF0UD̲EN̲Book.indb 48 2011/07/21 10:16:04