Integra DBS-50.3, Instruction Manual

Page: 47 / 72

EN
47
D
Note for “IP Address”, “Subnet Mask”,
“Default Gateway”, “Primary DNS” and
“Secondary DNS”
• The range of input numbers is between 0 and 255.
• If you enter a number larger than 255, the number will
automatically be 255.
• When you enter a wrong number, select “Clear” to
clear. (The number will be back to “0”.)
• If you want to enter a 1 or 2-digit number in one cell,
press [
Æ
] to move on to the next cell.
D Note for “Proxy Address” and “Proxy Port”
• The range of input numbers for the port number is
between 0 and 65535. (If you enter a number larger
than 65535, it will be regarded as 65535.)
• For proxy port, certain ports might be closed, blocked
or unusable depending on your network environment.
• Choose a connection speed in accordance with your
network environment.
• When the settings are changed, the network
connection may be disabled depending on the device.
ɶ Netflix ESN
You can view the ESN number which is a serial
number used by Netflix to identify a device. Netflix
customer service might ask you for this number during
troubleshooting.
1. Follow steps 1 to 2 in “Connection Test” on page 45.
2. Use
[ Î / ï ] to select “Netflix ESN”, then press
[Enter] .
3. Press [Home ] to exit.
12.2 Analog Output
[Home ] Ȼ “Settings” Ȼ “Audio Out” Ȼ “Analog Output”
You can set the audio output from AUDIO OUTPUT
(ANALOG 7.1ch) jacks.
• When HDMI cable is connected, make sure
“Audio Output” in “HDMI” is set to “Off” to change
“Analog Output” in “Audio Out”.
ɶ Test Tone
“Test Tone” is the test tone which can be output from
the speakers so that you can adjust the volume for each
speaker.
• The test tone is output from AUDIO OUTPUT
(ANALOG 7.1ch) jacks in the order shown below.
The speaker which "Speaker Size" is set to "None" is
skipped.
Front Lch Ȼ Center Ȼ Subwoofer Ȼ
Front Rch Ȼ Surround Rch Ȼ Surround Back Rch Ȼ
Surround Back Lch Ȼ Surround Lch Ȼ Front Lch Ȼ
Center Ȼ …
ɶ Delay Time
This is a parameter for optimizing the timing at which
the sound is output from the speakers according to their
distance from the listening position.
• When you change “Front”, “Center”, “Surround” and
“Back” will be changed automatically to match “Front”.
Item Adjustment range Default setting
Front
0 ft / 0.0 m ~
60 ft / 18.0 m
12 ft / 3.6 m
Center
Surround
10 ft / 3.0 m
Surround Back
Default Reset “Delay Time” setting to the default.
E5WF0UD̲EN̲Book.indb 47 2011/07/21 10:16:04