Customer Services (858) 578-7887 & (888) GO IN
TEC
IN
TEC
Controls, 12700 Stowe Dr., Suite 1
0
0, Poway, CA 92064
Fax (858) 578-4633 & (888) FX IN
TEC
www.inteccontrols.com
Specification subject to change without notice.
Printed in USA 131119
Polygard® is a registered trademark of MSR
LGC/LG2-04
PolyGard
®
Multi-Point Controller
User Manual - LGC/LG2-04
Page 21
4 Mounting / Electrical Connection
The Controller is installed through the 4 marked mounting holes at the back of the housing. These mounting holes
are accessible after opening the housing.
The mounting holes are covered with the enclosed caps after the end of the assembly.
Please consider the following when selecting the mounting place:
•
Avoid locations where water, oil etc. may influence proper operation and where mechanical damage might
be possible.
•
Cables are introduced from Topside.
•
On the left side to keep at least 150 mm distance to open the transparent door.
•
Consider any unusual condition or requirements of the Customer.
4.1 Electrical Connection
Installation must be per local electrical codes with the consideration of the technical requirements of the product.
The alarms are available as SPDT, potential free contacts.
The exact position of the clamps for the alarm relays is to be inferred the following connection diagram.
Specifications subject to change without notice. | USA 131119 | Page 21 of 30
12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.IN
TEC
| relevantsolutions.com/inteccontrols
LGC-LG2 – UserManual
Polygard® is a registered trademark of MSR | LGC/LG2-04
Specifications subject to change without notice. | USA 160104 | Page 21 of 30
12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.IN
TEC
| relevantsolutions.com/inteccontrols
LGC-LG2 – UserManual
PolyGard
®
is a registered trademark of MSR-Electronic GmbH | LGC/LG2-04
INTEC Controls | 12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.INTEC | inteccontrols.com
Specifications subject to change without notice. | USA 200211 | Page 21 of 30
LGC-LG2 – UserManual
