Customer Services (858) 578-7887 & (888) GO IN
TEC
IN
TEC
Controls, 12700 Stowe Dr., Suite 1
0
0, Poway, CA 92064
Fax (858) 578-4633 & (888) FX IN
TEC
www.inteccontrols.com
Specification subject to change without notice.
Printed in USA 130917
Polygard® is a registered trademark of MSR
DGC3
PolyGard
®
Digital Gas Controller
User Manual - DGC3
Page 05
2.3
Code Levels
All inputs and changes are protected by a four-digit numeric code (= password) against unauthorised intervention.
All menu windows are visible without entering a code.
Level 1: (1234)
Code level 1 allows the operator to acknowledge alarms and to manually activate the alarm relays.
Level 2:
Code level is intended for the service technician to change parameters and set-points.
Level 3:
With code level 3 it is possible to register and deregister transmitters in addition to code level 1. This code is
released by MSR only in emergency situations.
Level 4:
Code level 4 is intended for updating the maintenance date. Normally the code is only known by the service
technician and can be changed individually via code level 2.
The release of a code level is cancelled if no button is pushed within 15 minutes.
3 Menu Overview
The operation of the Gas Controller DGC3 is done via a simple and logical menu structure which is easy to learn.
The operating menu contains the following levels:
Starting menu: Scrolling of the measuring points of all registered transmitters in 10-second intervals.
Main menu
Submenu 1 and 2
Starting menu
Main menu
Submenu
Display and reset of errors
See from point 3.1
Displays the status of actual alarms
See point 3.2
Display of the relay status
Manual operation of the relays
Reset function of the relays
See from point 3.3
Displays the measured values
See point 3.4
Display and change of the relay parameters
See from point 3.5
Display and change of the measuring point parameters
Activate
or
deactivate
MP
Assignment of the alarms to the alarm relays
See from point 3.6
Display
and
change
of
the
system
parameters
See from point 3.7
INTEC Controls
DGC3
System Errors
Status Alarm
Status Relay
Measuring Values
Relay Parameter
MP Parameter
System Parameter
Specifications subject to change without notice. | USA 130917 | Page 5 of 22
12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.IN
TEC
| relevantsolutions.com/inteccontrols
DGC3 – UserManual
Polygard® is a registered trademark of MSR | DGC3
Specifications subject to change without notice. | USA 160104 | Page 5 of 22
12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.IN
TEC
| relevantsolutions.com/inteccontrols
DGC3 – UserManual
PolyGard
®
is a registered trademark of MSR-Electronic GmbH | DGC3
INTEC Controls | 12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.INTEC | inteccontrols.com
Specifications subject to change without notice. | USA 200211 | Page 5 of 22
DGC3 – UserManual
