TwinLock B670/C690 CashProtect DS
Operation
Manual V.1.01B
54
4.14
Settings: Manager
4.14.1
Changing the System Manager Code
The system manager code of the lock (= system code) does not enable its
holder to open the lock, but to configure the system. Currently (10/2021), the
changed code is not copied to lock 2 automatically.
Caution
With the system manager code in ex works version,
your system is not protected.
Change ex works code as soon as possible. Never use
series of numbers corresponding with personal data.
Without system manager code, you cannot
configure the system.
Save the system manager code in a secure place
accessible to the system manager only.
Danger of functional loss.
Make sure that the system manager code consists of
the same sequence of digits within every lock of the
system. Use the copy function.
1.
Unlock the system by opening lock 1 or by opening all locks.
2.
With key
>
select
Settings
and select key
Enter.
Settings | Manager
is on display.
3.
Confirm with key
Enter
.
Code entry
,
System manager
, and, as the case may be,
0123456789
and
Code:
are on display. Also see
„Entering PIN Code“.
4.
Enter the system code.
System manager | Please wait
is on display, followed by
New manager code | Change code
is on display.
5.
Enter the new system code.
Confirm code | Code:
is on display.
6.
Repeat entering the new system code.
New manager code | Saved
.
You have changed the system manager code successfully.
