TwinLock B670/C690 CashProtect DS
Safety
Manual V.1.01B
11
2
Safety
This chapter provides a survey of aspects, which have to be noted in order to protect
people and to guarantee a safe and trouble-free operation of the system. See further
task specific safety warnings in the following chapters in front of the descriptions of
the operational steps for which these warnings have to be observed.
2.1
Intended Use
Warning
Danger of locking persons in.
Mortal danger due to possible lack of air / food.
Before closing a lock, make sure that nobody is inside the
container / room you are about to lock.
Use the high-security electronic lock system for opening and closing safes /
containers for valuables and for the administration of the opening and closing
procedures only.
2.2
Danger Due to Electrical Energy
Jobs which require the removal of the housing of units of the system, like described
in the Assembly Instructions, may be performed by skilled electricians only
(definition see p. 12), which have been trained and entitled to perform these jobs by
INSYS MICROELECTRONICS or approved partner companies.
Caution
Danger of short circuit of electric components.
Danger of damage to the system.
Follow the instructions on cleaning the system.
Perform jobs on hardware components like described in the
Assembly
Instructions.
Unauthorised
retrofitting
and
modifications are forbidden.
2.3
Responsibility of the Operating Company
In case the high security lock system is used in a business environment, the
operating company has to take care to follow the legal requirements concerning
occupational health and safety.
In addition to the safety warnings of this manual, also the laws and regulations
concerning safety, the prevention of accidents and the protection of the environment
have to be observed that apply in the region where the system is operated.
