TwinLock B670/C690 CashProtect DS
Operation
Manual V.1.01B
51
4.12.14
Arming a Burglar Alarm System (BAS)
Depending on the setting in the PC software
(‘Settings /
Alarm /
TwinAlarm / Arming with code card
’ On / Off
, for example), users either
enter PIN code or insert their code card to arm the BAS or they do not
have to do so.
Settings
TwinAlarm and BAS are connected, TwinAlarm is activated, BAS
disarmed and all locks are closed. Only under these conditions
menu
Arming BAS
for arming the BAS is on display.
In menu
Settings
Alarm devices
, the system manager has
set
TwinAlarm
to
* yes
. For you he has, if necessary, selected
options
Release
,
PIN code
and / or
Card
of the user matrix.
You can also set this parameter via the hidden menu, sub menu
Alarm devices
. S
ee „
Displaying the Hidden Menu
“
, page 52.
1.
Lock the system by closing lock 1 or, if necessary, all locks.
See ‘The System Status’ in this chapter. The system is locked.
2.
Press key
Enter
and release it after a second.
Open
or
Close
is on display, as it may be.
3.
With key
>
select
Arming BAS
and afterwards
Enter
.
In case
! BAS armed !
is on display, you already have armed the BAS
successfully. Skip the rest of this piece of instructions.
With option ‘Arming with code’ set,
Code entry | User: Master
and
PIN code
are on display.
4.
If required, present your user identification data and confirm
PIN code
or
with
>
select
Code card
and
Enter
and open lock 1.
Also see
‘
User- / Personnel Numbers
’ on page
33. Depending on your selection,
the appropriate menus are displayed. The procedures of code entry and card
insertion are the same as for opening a lock. See th
e instructions ‘Open a Lock
…’ at the beginning of this chapter
.
User: No. | Please wait
is on display. An acoustic signal beeps.
User:
No. | ! BAS armed !
is on display.
You have successfully armed / set the burglar alarm system.
