Functions
MoRoS LAN PRO 2.0
66
12.7.3
Configuring Time and Time Zone
The MoRoS LAN PRO 2.0 has an internal clock to control time-controlled events. This clock
must be set to ensure that time-controlled events are processed precisely to the desired
time, and that system messages are dated correctly. The clock of the MoRoS LAN PRO 2.0
can be updated automatically via an NTP server from the Internet. During each connec-
tion setup, the MoRoS LAN PRO 2.0 will attempt to synchronize the time from the speci-
fied NTP server. In contrast to the time, the time zone must be manually adjusted to the
location of the MoRoS LAN PRO 2.0.
Configuration with the web interface
In order to
configure time and date
, enter in the menu "System" on the page
"Time" enter the values for day, month, year, hour and minutes in the entry
fields "DD MM YYYY hh mm".
Configure the
time zone of the location of the MoRoS LAN PRO 2.0
by select-
ing this from the drop-down menu "Timezone".
In order to
synchronise time and date via NTP server
, check the checkbox
"Clock synchronisation with" and enter the name of an NTP server or its IP ad-
dress into the entry field.
In order to
synchronise time and date daily at a certain time via NTP server
,
check the checkbox "Additionally every day at" and enter the time for the daily
synchronisation into the entry field.
In order to
synchronise time and date immediately via NTP server
, check the
checkbox "Update time now". Then, it will be tried to connect to the NTP
server to synchronize the time once with saving the settings. This enables to
check the NTP server settings immediately.
Save your settings
by clicking "OK".
12.7.4
Resetting the Device
You can reset the MoRoS LAN PRO 2.0 via the web interface or by pressing the reset key
on the front of the device. You can simply restart your device or reset all settings to the
factory defaults. You can initiate a software reset by shortly pressing the reset key once.
A hardware reset of the MoRoS LAN PRO 2.0 can be initiated by pressing it for at least
three seconds. A restart will be performed in both cases. Pressing the reset key three ti-
mes for a short time within two seconds loads the factory defaults of the MoRoS LAN
PRO 2.0.
Configuration with the web interface
In order to
restart the MoRoS LAN PRO 2.0
, select in the menu "System" on the
page "Reset" the radio button "Reset". Click on "OK" to perform the restart.
In order to
restart the MoRoS LAN PRO 2.0 and load the factory defaults
, se-
lect in the menu "System" on the page "Reset" the radio button "Load default
configuration and reset". Click on "OK" to perform the restart and reset the
MoRoS LAN PRO 2.0 to factory defaults.
In order to
configure a daily restart at a certain time
, check the checkbox "Dai-
ly reset at" and enter the time for the daily reset into the entry field.
Save your settings
by clicking "OK".
