Installation
MoRoS LAN PRO 2.0
22
9
Installation
This chapter describes how to mount the MoRoS LAN PRO 2.0 to a DIN rail, connect it to
the power supply and uninstall it again.
Danger!
Exposed electrical components!
Risk of death through electric shock hazard!
Prior to the installation, switch the power of the cabinet
off and secure it against being switched on again.
Danger!
Moisture and liquids from the environment may seep
into the interior of the MoRoS LAN PRO 2.0.
Risk of death through shock hazard when touching it!
The MoRoS LAN PRO 2.0 may not be used in wet or damp
environments, or in or very close to water. Install the de-
vice at a dry location, protected from water spray. Switch
the power supply off before you do any work on a device
which may have been in contact with moisture.
Note
The device could be destroyed if the wrong power supply
is used.
If the MoRoS LAN PRO 2.0 is used with a power supply
which has a larger voltage than the allowed operational
voltage of the MoRoS LAN PRO 2.0, the device is de-
stroyed.
Make sure that you use the suitable power supply. The
chapter "Technical Data" has the information about the
correct voltage range for the MoRoS LAN PRO 2.0.
