INSYS GSM 4.2 easy, Add-On Manual

Page: 37 / 39

6 Remote Configuration with EASY-SOFT and INSYS
Connect
In the supplied software EASY-SOFT by Moeller, no functionality is designed for
remote configuration.
The INSYS GSM 4.2 easy therefore includes the program „INSYS Connect“, which
initiates the connection setup to a remote INSYS GSM 4.2 easy. A compact control-
ler Moeller easy is connected to this device.
For the connection setup, a communication device (e.g. analogue modem, ISDN TA
or GSM Modem) is required locally. Any of these devices can be used to establish a
connection to the remote INSYS GSM 4.2 easy via a dial up connection. When the
connection is established, INSYS Connect will retreat from the serial interface. The
communication device connected to this serial interface now has no connection
to another program, but maintains the connection. The program EASY-SOFT can
now be started and program the easy device as if it was connected to a local serial
port. The serial interface, to which the communication device with the data con-
nection to the remote INSYS GSM 4.2 easy is connected, is used for this process.
PC
Modem /
ISDN-TA /
GSM
public phone network
INSYS
GSM easy
Moeller
easy
Please note:
To perform the remote configuration, the waiting period in EASY-SOFT must be
adjusted. Otherwise, EASY-SOFT doesn’t wait long enough for the response of the
addressed easy device. This device is not located at the local serial port, but the
communication takes place via the GSM network. The response times are delayed
due to the transmission link.
Depending on the quality of the connection, the waiting period for the communi-
cation set up must be increased more or less.