INSYS GSM 4.2 easy, Add-On Manual

Page: 32 / 39

32 Oct-08
5.7.2 System Monitoring
5.7.2.1 Scheduled Logout/Login
Log the INSYS GSM 4.2 easy in and out for a short period every day to allow main-
tenance functions of the GSM provider. Enter the logout time and the duration (1
to 98 minutes).
The INSYS GSM 4.2 easy logs in into the GSM network again afterwards, if the PIN
of the SIM card is stored.
5.7.2.2 Scheduled Logout/Login with Reset
In addition, a device reset can be performed for a periodic logout/login with reset.
The INSYS GSM 4.2 easy logs in into the GSM network again after the reset, if the
PIN of the SIM card is stored.
5.7.2.3 Periodic Alive Message via SMS
The INSYS GSM 4.2 easy can send an „Alive“ message to the entered phone num-
ber as SMS message, daily, weekly or monthly. The LED
Status is flashing during
the dispatch.
5.7.2.4 Power Up SMS
If this function is active, an SMS is sent with each power up (not Reset).
5.7.3 Date / Time
Set the real time clock date and time of the INSYS GSM 4.2 easy to a freely se-
lected time or to the system time of the configuration PC.
5.7.4 Serial Interface
The parameters for the serial interface depend on the model of the connected
Moeller device. The compact controllers Moeller easy 500 and 700 communicate
with
4800
bps
8N1
. The compact controllers Moeller easy 800 and MFD commu-
nicate with
9600
bps and the data format
8N1
.
It is important to set the correct speed. Even if only the easy model is
replaced (e.g. easy800 for easy500), the speed must be adjusted.