INSYS GSM 4.2 easy, Add-On Manual

Page: 26 / 39

26 Oct-08
5 Configuration with the Software HSComm easy
5.1 General
The software HSComm easy is used to configure the INSYS GSM 4.2 easy in Win-
dows, without the need for explicit knowledge of the
AT
commands and their pa-
rameters. The settings are only sent to or read from the INSYS GSM 4.2 easy after
the according instruction (buttons Send settings or Read settings).
The configuration software HSComm is available on the Internet for free
download: http://www.insys-tec.de/
The software can also be found on the supplied CD-ROM.
5.2 Help
The context sensitive help is available any time via the key F1 or the menu
Help
.
Help also contains the complete command reference for the extended INSYS
AT
commands.
5.3 Menus
5.3.1 File
The current settings, as displayed in the HSComm user interface, can be saved as a
file and read out again.
5.3.2 Interface
Setting of the serial interface which is used at
the configuration PC. The baud rate and the for-
mat (data bits, stop bit, and parity) must match
the settings of the serial interface at the INSYS
GSM 4.2 easy.