INSYS GSM 4.2 easy, Add-On Manual

Page: 35 / 39

5.8.2 Configure monitoring
Clicking the button „Configure“ displays the special configuration of the function.
The table is not used to enter data, but to visualize the configuration. The entry
takes place below the table.
Selecting the monitoring line in the configuration window is done either with the
selection box „No.“ or by double-clicking the according line in the alias table.
The displayed settings are only effective when monitoring is turned on
in the main window!
Settings from 1 to 255 seconds are possible for the monitoring interval.
Settings from 1 to 255 minutes are possible for the intervals between sending at-
tempts.
Up to 10 object instances can be monitored altogether. In the text field „Alias“ an
object instance which has already been allocated an alias can be selected option-
ally. If this is not preferred or if no alias is defined yet, „Manual entry“ must be se-
lected. This means that the monitored object and the preferred instance can be
manually selected.
The monitoring type as well as the minimum and maximum value depend on the
monitored object instance.