CombiLock 200 simplex / pro / pro RFID
INSYS locks
49
Manual V.1.10
1.6
Personnel Requirements
1.6.1
Qualifications
Persons operating the electronic lock system CombiLock 200 simplex / pro / pro RFID
have to be capable of reading and understanding this guide in order to be able to get
acquainted with the assembly and operation procedures described und to be able to
assemble and operate the system safely and securely.
The various tasks described in this manual demand different kinds of qualification of the
persons, which are to perform these tasks.
Warning
Danger due to insufficient skill / training of persons assembling
the system.
Persons, who are not qualified sufficiently, may not be able to
assess the risks arising from handling elements under voltage.
Have no other people but trained electricians perform jobs, which
require the removal of the housing or the insulation of units of the
system.
Make sure other people are kept off the work area while such jobs
are being carried out.
Skilled electricians only, which have been instructed about the system by INSYS
MICROELECTRONICS or a partner company and have been authorised by one of these
companies, may perform jobs, which require the removal of the housing of units of the
system or the modification of the hardware configuration.
1.6.1
Definition of ‘Skilled Electrician’
Skilled electricians can perform jobs on electric systems. They are able to be aware of
possible dangers autonomously and they can avoid them due to professional training,
knowledge and experience and due to knowledge of the applicable standards and rules.
They have been trained especially for the working environment in which they operate
and they know the relevant standards and rules.
1.7
Protection of the Environment
The operating company has to see to it that all legally relevant aspects concerning
environmental protection, which are valid at the place where the system is operated, are
followed throughout the life cycle of the product.
Also see section “
Disposal
“
on page 84.
