INSTROTECH 6004BW, Manual

Page: 47 / 58

Service Menu
Function Block Number 17
17.
- DIGITAL INPUTS -
To view or alter the digital inputs press Enter when the DIGITAL INPUTS function block is displayed. All
values can be inserted or altered when highlighted. Do not press enter until all required changes to the
entire block are completed.
Digital Inputs (D1-6) are inputs from remote potential free contacts. Contact closure activates the input. For
use with rugged pushbuttons (instead of the keypad) or for interlocks
Each input can be individually selected for a number of functions such as :-
No function, Tare, Toggle net/gross, Print, SP latch reset, Reset max value, Reset min value, Reset
max/min, Reset total 1, Set setpoints, Pretare, PI man/auto, PI start, PI stop, PI increase, PI decrease, Belt
zero, LIW start, LIW stop, TP start, TP stop, TP residual, TP interlock, Zero trim, Dyna power, Dyna RPM,
Dyna torque, Bag start, Bag stop, Bag interlock, Bag footswitch, Bag pproduct sense, Bat start, Bat stop,
Bat add water, Bat change A-D, Bat set SPs,.....
Default inputs D1 D2 D3 D4 D5 D6
Loadcell Tx None Net/Gross M/M reset Tare None None
Suggested Digital Inputs for other applications
LCT + Pretare None Set Sps M/M rese Print None None
LCT + PI Stop LCT None M/M reset Print Start PI Man/auto
Beltweigher None Tot reset M/M reset Print None None
Belt W + PI Stop BW Tot reset M/M reset Print StartPI Man/Auto
Loss-in-Wght Stop LiW Tot reset M/M reset Print Start LiW None
Loss in W+PI Stop LiW Tot reset M/M reset Print Start LiW Start PI
Throughput StopTP Tot reset Discharge Print Start TP Residule
Dynamometer None Print M/M reset Show kW Show Nm Show RPM
Bag Filler Stop BW Tot reset RemoteTare Bagclamp Psensor FootSwitch
Batch Weigh Stop BW Intlok1 Intlok2 Intlok3 Intlok4 Start Batch
When the entire block is ready press Enter . This will set the whole block and move on to the next block, in
this case DISPLAYS.
Service Menu
Page
46