background image

1.0 - INTRODUCTION

Your new Instanta Boiler is designed to give years of trouble-free service provided that the instructions 

contained in this manual are followed.

All new Instanta products are energy efficient, simple to operate and easy to service.

2.0 - WARNINGS & PRECAUTIONS

Please read the following carefully before starting work on this equipment

A  competent  installation  engineer  should  install  this  appliance  in  accordance  with  the  installation  instructions  for  this

appliance and all relevant local and national standards including the following:

• Health & Safety at Works Act

• IEE Regulations

• Local and National Building Regulations

• BS Codes of Practice

• Water Supply Regulations

Your new water boiler is designed to provide a constant source of near boiling water for the preparation of hot

drinks. THIS IS VERY HOT

All personnel must be provided with sufficient and appropriate training in the safe use of this appliance.

In line with Health and Safety requirements we recommend that a risk assessment be carried out after the boiler has been

installed.

The push-button on the dispense-font illuminates RED. This should be sufficient in warning users that the font dispenses

hot water. However, if deemed necessary, a warning notice displayed next to the water font would be helpful in notifying

users that the appliance contains and dispenses near boiling water.

During normal use of the boiler, all surfaces remain cool. However, care should be taken to avoid potential injury from burns

and scalding whilst dispensing water from the font.

Scale formation within the hot water appliances can be problematic in hard water areas. Damage to the appliance caused

by excessive scale build up may invalidate the warranty. See notes on de-scaling.

ENVIRONMENTAL - Information on Disposal for Users of Waste Electrical & Electronic Equipment.

The “crossed out wheelie bin” symbol on this product means that discarded electrical and electronic products should not

be mixed with general waste. Disposing of the product correctly will help to save valuable resources and prevent any

potential negative effects on human health and the environment which could otherwise arise from inappropriate waste

handling. For proper treatment, recovery and recycling of end-of-life products, please contact your dealer or supplier for

further information, or local authority for details of your nearest designated collection point.

3.0 - CHECK LIST

Before starting installation check that you have the following parts:

1.  Under-counter Boiler

2.  Counter-top Water Font (c/w rubber water tube, electrical plug and earth lead)

3.  Drip-tray Drain Kit

4.  Paper Template (hole positions for fixing water font to counter-top)

5.  2 Metre Long Water Hose (WRAS approved - 3/4”bsp)

6.  Plastic Hose Clip (to secure Water Tube)

7.  1 Sachet of De-scaler

8.  Red Link Wire (for optional 30Amp electrical configuration) c/w instruction sheet

4.0 - INSTALLATION

Summary of Contents for UCD12









Reviews: