FILTER COUNTER
(Optional if a filter or softener has been fitted):
If an external filter/softener is fitted to the unit there is an optional filter-counter installed in the
software. This counter measures the water passing through the boiler and reminds the customer (via
the display screen) to change the filter when required.
Note: This counter is set to ‘Off’ as standard.
To enable filter-counter, proceed as follows:
-
Turn machine off on front panel.
-
Press & hold “on/off” button (for approximately 12 seconds) until red screen shows “PR” in
centre of screen, then release button. Temperature setting is displayed.
-
Press & hold button (long push) for approximately 5 seconds until screen changes to show
“empty filter symbol” (default filter setting).
-
Press button (short push) to scroll between the different filter settings;
SOFT (13001 litres)
MEDIUM (9001 litres)
HARD (6001 litres)
EMPTY FILTER SYMBOL (No Filter counter)
-
With the required filter setting selected, Press & hold button (long push) for 4 seconds to
save.
-
Press & hold button (long push) for approximately 6 seconds until display goes blank.
-
Turn machine back on again.
-
TO RE-SET & CONFIRM NEW SETTINGS;
…P
ress & hold button, screen will go blank but
continue to hold, until “READY” message is displayed on a red screen.
-
The unit can then be switched back on and used.
If in doubt as to the hardness of water supplied in your area, consult your local water authority
PREVENTATIVE MAINTENANCE:
AQ35/KIT
–
The Instanta AQ35 high-flow multi-filter delivers the best quality of water by removing
sediment and impurities such as chlorine. The filter also reduces scale build-up which results in lower
running costs, improved energy efficiency and longer life expectancy. Filter capacity: up to 13,500
litres
Available from Instanta Spares Department: 01704 501114
CLEANING
Clean the external surfaces of the boiler regularly to maintain good hygiene
Wipe external surfaces of the boiler with a damp cloth. Do not use abrasive materials on the outer
surfaces.
